Monthly Service Report · Updated November 2, 2026
Electrician in Manti
Licensed, permit-pulled electrical work for homes and businesses in and around Manti.
What the team did in Manti
electrical jobs completed in Manti — all permit-pulled and inspected
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Manti, UT (ZIP 84642). The team has completed 2 jobs in Manti since August 2025, spanning troubleshooting and service calls, panel diagnostics, and general electrical scopes suited to an aging housing stock where the majority of units predate modern wiring standards. All work is permit-pulled through the Manti City Building Department with required inspection before wall cover or energizing.
Neither September 2026 nor September 2025 recorded a Manti job in the JobTread system, so the 2 completed jobs represent the full baseline since August 2025. Both jobs fall under the 84642 zip code. Year-over-year volume is flat at zero for the September reporting window, with the cumulative Manti total holding at 2 since tracking began.
Across these 2 Manti jobs, Caddis has handled electrical scopes appropriate to the city’s predominantly older housing: troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation) and general panel work consistent with the pre-1980 building era that defines most of the local inventory. The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Manti work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Manti
Manti is the county seat of Sanpete County, situated in the Sanpete Valley approximately 100 miles south-southeast of Salt Lake City along US-89. The city sits at roughly 5,530 feet elevation against the Wasatch Plateau to the east, with the Manti-La Sal National Forest providing the dominant eastern backdrop. Neighboring communities in Sanpete County include Ephraim (3 miles north), Sterling, and Gunnison to the south. The North Sanpete School District and South Sanpete School District serve the broader county, with Manti High School anchoring local secondary education. The region’s identity is tied to agricultural heritage, the Manti Utah Temple, and a rural small-city character distinct from the Wasatch Front urban corridor. Caddis Electric dispatches from Springville, UT, reaching Manti via I-15 south to Spanish Fork, then US-6 east briefly before picking up US-89 south through Thistle Junction and the Sanpete Valley, a route of approximately 90-100 miles.
About Manti’s housing stock
Manti’s housing stock is heavily weighted toward older construction, a profile with direct implications for electrical condition and upgrade demand. According to Census ACS 2023 Table B25034, 65.2% of Manti’s 1,216 total housing units were built before 1980. The largest single-era cohort is the pre-1939 segment, representing approximately 34% of all units, or roughly 413 homes. These are the structures most likely to retain knob-and-tube wiring, ungrounded two-prong circuits, and undersized service entrances that were standard before NEC modernization. Any remodel, addition, or panel upgrade in a pre-1939 Manti home typically triggers a code-compliance review of existing branch circuits.
The 1970s construction cohort accounts for approximately 16% of Manti’s housing units, or roughly 195 homes. Homes built during this era were frequently wired with aluminum branch-circuit conductors, which present elevated fire risk at device terminations if CO/ALR-rated outlets and switches were not installed or have degraded over time. Remediation typically involves replacing devices with CO/ALR-rated hardware or installing copper pigtail terminations using COPALUM or AlumiConn connectors at each outlet, switch, and fixture location. At the Utah Wasatch Front pricing range of $75-$150 per device, full-home aluminum remediation in a 1970s Manti build can run $8,000-$18,000 depending on unit size and device count.
New construction represents only 6.6% of Manti’s housing units, reflecting the city’s stable, slow-growth character relative to high-expansion Utah County communities. This limited new-build share means the dominant electrical demand in Manti comes from upgrade, remediation, and remodel work on the existing aging stock rather than from rough-in and service-entrance coordination on new homes. The combination of a large knob-and-tube-era inventory and a meaningful aluminum-wiring cohort positions Manti as a market where diagnostic and remediation capabilities are more relevant than volume new-construction wiring capacity.
Electrical services for Manti residents
Serving Manti residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Manti, answered
Is there a licensed electrician serving Manti, UT?+
Caddis Electric is a licensed Utah residential and commercial electrician that has completed jobs in Manti (ZIP 84642) since August 2025. The company is based in Springville, UT and holds a Utah electrical contractor license covering both residential and commercial scopes.
How much does EV charger installation cost in Manti, UT?+
A Level 2 (240V) EV charger installation in Manti typically runs $800-$2,500 for a straightforward install with a short cable run; costs rise to $2,500-$4,000 if a long conduit run or subpanel upgrade is required. Actual pricing depends on panel capacity, garage layout, and conduit distance. A load-calculation review of the existing panel is standard before any EVSE install.
What does a 200-amp panel upgrade cost in Manti, UT?+
A standard 100A-to-200A residential panel upgrade in Manti runs approximately $2,800-$4,500; if the utility requires a new service entrance, which is common on 1970s and 1980s homes, the range climbs to $5,500-$8,000. Manti’s housing stock is predominantly pre-1980, so service-entrance replacement is a common add-on. Permit is pulled through the Manti City Building Department before any panel work begins.
Do I need a permit for electrical work in Manti, UT?+
Yes. Permit applications are filed with the Manti City Building Department (manti.com) before work begins on any panel upgrade, new circuit, or service-entrance modification. Standard permit issuance typically takes 24-72 hours after application, with inspection scheduling running 2-5 business days after permit issuance. Caddis pulls all required permits as part of the project.
Who services aluminum-wiring homes in Manti, UT?+
Caddis Electric performs aluminum branch-circuit remediation in Manti, including CO/ALR device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Approximately 16% of Manti’s housing units, roughly 195 homes, were built during the 1970s aluminum-wiring era according to Census ACS 2023 Table B25034. Device-level remediation typically runs $75-$150 per outlet or switch; full-home rewire ranges from $8,000-$18,000 depending on home size.
Can Caddis Electric install a generator in Manti, UT?+
Yes. Caddis installs standby and backup generators including automatic transfer switch (ATS) installation and bonding per NEC Article 702. Whole-home standby generator installation (18-26 kW) typically runs $8,000-$15,000 including the ATS; a transfer-switch install for a portable generator runs $800-$2,000. Manti’s rural location and distance from Wasatch Front utility infrastructure makes backup power planning a practical consideration for many properties.
How long does an electrical permit take in Manti, UT?+
Standard permit issuance through the Manti City Building Department typically takes 24-72 hours after a complete application is submitted. Inspection scheduling after permit issuance generally runs 2-5 business days. Complex or commercial scopes may require additional review time.
Does Caddis handle remodel electrical in Manti, UT?+
Yes. Caddis performs remodel electrical scopes including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring. In Manti, where approximately 34% of housing units were built before 1939 according to Census ACS 2023 Table B25034, remodel work on pre-1939 structures frequently involves evaluating or replacing knob-and-tube wiring alongside the remodel scope.
What electrical issues are most common in older Manti homes?+
Manti’s housing stock shows two concentrated risk eras. Approximately 413 homes, or 34% of the city’s 1,216 total units, predate 1939 and may retain knob-and-tube wiring, ungrounded circuits, and undersized service panels. Roughly 195 homes built in the 1970s may have aluminum branch-circuit wiring, which requires CO/ALR device upgrades or copper pigtail terminations to meet current NEC standards. These two cohorts together account for roughly half of all Manti housing units.
How far does Caddis Electric travel to serve Manti, UT?+
Caddis Electric’s base is in Springville, UT, approximately 90-100 miles north of Manti via I-15 south and US-89 through the Sanpete Valley. Manti falls outside the company’s primary Utah County, Salt Lake County, Wasatch County, and Davis County service footprint; availability for Manti jobs should be confirmed directly with Caddis before scheduling.
across 19 Google reviews
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Manti, ZCTA 84642)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Manti City Building Department — permits and inspections for electrical work in Manti, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
