Electrical Repairs.
When something’s wrong, not when you’re adding something new. Troubleshooting, code remediation, aluminum wiring, failing panels, and the quiet problems that older homes develop. Honest diagnosis first, firm quote second.
Something’s wrong with what’s already there.
Repair work is anything we fix on your home’s existing electrical system. A breaker that trips every time the dryer and the microwave run together. A GFCI in the kitchen that keeps going off for no apparent reason. An outlet in the basement that measures warm to the touch. A Federal Pacific panel your insurance carrier just flagged at renewal. A failed home inspection list from a pre-sale walk-through. These aren’t things you’re adding to the house — they’re things that need attention on what’s already in it.
Repair starts with honest diagnosis. We don’t sell panel upgrades to people who need a single outlet replaced, and we don’t paper over a real safety problem with a quick fix. We open the panel, test circuits with a meter, check device terminations, and figure out what’s actually wrong before we tell you what the fix costs. On a lot of calls the answer is a 20-minute troubleshooting visit, a loose wire tightened, and you’re done — we’ll say that honestly rather than invent scope.
Older Utah homes have specific patterns we see over and over. Houses built roughly 1965 to 1973 across Orem, Provo, Pleasant Grove, Sandy, and Cottonwood Heights often have solid aluminum branch wiring that insurance carriers now flag at renewal — our aluminum wiring page has the full story on AlumiConn and COPALUM remediation. Houses from the 1960s through 1985 often have Zinsco or Federal Pacific Stab-Lok panels where the breaker doesn’t trip under fault — that’s a panel-replacement conversation. Houses from any era often have missing GFCI in the kitchen or missing AFCI in the bedrooms, which is a code compliance retrofit.
And some repairs come from life events, not from the house itself. You’re selling and the buyer’s inspector handed you a punch list. Your insurance carrier reviewed photos and sent back a remediation requirement. You’re refinancing and the appraiser flagged two-prong outlets. These are all repair scopes — we work from the list, document each item, and hand you clean paperwork at closeout.
The repair scopes we see most.
Each of these has its own detail page with the full scope, FAQs, and the NEC articles that drive the work. Panel upgrades show up here too — sometimes a panel upgrade is a capacity-driven install, sometimes it’s a repair of a failing or dangerous panel.
Don’t ignore these.
Breakers trip for no obvious reason
A breaker that trips once a year under heavy load is probably fine. A breaker that trips every time the microwave starts, or that trips at random with nothing drawing load, is telling you something is wrong on that circuit.
Outlets or switches are warm to the touch
Any device that’s warm to the touch under normal use is a warning sign — a loose connection is heating up, which is how fires start. This matters most in aluminum-wired homes from the late 60s and early 70s.
Lights flicker or dim when appliances start
Occasional flicker when the AC compressor kicks on is normal. Persistent flicker, dimming across the whole house when a single appliance starts, or buzzing from switches and panels is not — it points to loose neutrals or an undersized service.
Inspection or insurance flagged something
Home sale inspections, insurance underwriting reviews, and refi appraisals all catch electrical issues — missing GFCI, aluminum wiring, Federal Pacific panels, no bonding. We remediate per current NEC and produce the documentation your carrier or lender wants.
“If the honest answer is ‘stay at 100A, add this one circuit, come back in five years,’ we’ll say that. We’d rather earn the next job than oversell this one.”
— Tyler Thorn, Owner
Not every repair fits in a tidy category.
These show up on repair calls regularly and often ride along with the main scope. They don’t each need their own service page, but they’re real work we do.
Troubleshooting intermittent problems
The light that only flickers on windy nights. The outlet that only dies when the fridge compressor runs. The breaker that trips every third Tuesday. Troubleshooting is detective work — we come out, measure, and find the actual cause.
Insurance remediation after an inspection
Your carrier reviewed photos or sent out an inspector and came back with a list. We work from the list, remediate each item per current NEC, and produce documented sign-offs you can send back to underwriting.
Bringing older systems up to code for refi or home sale
A refinance appraiser or a buyer’s inspector will flag two-prong outlets, missing GFCI in wet rooms, missing AFCI in bedrooms, undersized grounding, and more. We clear the list before closing so the deal moves forward.
We repair across Salt Lake County, Utah County, Wasatch County, Davis County from our Springville base. See all service areas →
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
