Monthly Service Report · Updated November 2, 2026
Electrician in Plain City
Licensed, permit-pulled electrical work for homes and businesses in and around Plain City.
What the team did in Plain City
electrical job completed in Plain City — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Plain City, UT (ZIP 84404). The team has completed 1 job in Plain City since August 2025, with capabilities spanning panel upgrades, EV charger installation, aluminum branch-circuit remediation, generator installation, and remodel electrical. All work is permit-pulled through Plain City Building Services with required inspection before wall cover or energizing.
Through the September 2026 report period, Caddis recorded 0 jobs in Plain City for September 2026 and 0 jobs in September 2025, reflecting a single-job presence in the area to date. The one recorded job falls within the 84404 ZIP code. Volume in this area is early-stage; the job history since August 2025 represents the initial footprint in Plain City rather than a mature service territory.
Across the 1 Plain City job completed since August 2025, Caddis has demonstrated readiness across multiple distinct electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps), EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews), aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors), generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702), and remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions). The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Plain City work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Plain City
Plain City is a small municipality in Weber County, Utah, situated northwest of Ogden in the northern Wasatch Front. It sits adjacent to Ogden and West Haven and is served by the Weber School District. The area is characterized by its agricultural heritage and rural residential character, with the Wasatch Range visible to the east and the broad floodplain of the Weber River shaping the surrounding landscape. Plain City lies well north of Utah County but falls within the broader Wasatch Front corridor that Caddis Electric serves across Salt Lake, Utah, Wasatch, and Davis counties. Caddis Electric dispatches from Springville, UT, reaching Plain City via I-15 north through Salt Lake City and continuing north on I-15 to the Ogden area, then west on local roads into the Plain City community.
About Plain City’s housing stock
Plain City’s housing stock reflects a broad era distribution that drives a wide range of electrical service needs. According to Census ACS 2023 Table B25034, Plain City accounts for approximately 23,907 total housing units. Homes built prior to 1980 represent 43.8% of the stock, meaning more than four in ten structures predate modern NEC aluminum-wiring and AFCI requirements. Within that cohort, 12.8% of units (approximately 3,060 homes) were built during the 1970s, the peak decade for aluminum branch-circuit wiring. These homes frequently require CO/ALR device replacement or COPALUM/AlumiConn pigtail remediation at outlets, switches, and fixtures to address the fire-risk conditions that aluminum-to-device terminations can create over time.
The pre-1939 segment represents 7.2% of Plain City’s housing units, or roughly 1,721 homes. Structures of that age may retain portions of original knob-and-tube wiring, ungrounded two-prong circuits, and service entrance equipment that predates current NEC minimums. Inspections for real-estate transactions, insurance renewals, and home additions in this segment routinely surface code deficiencies that require remediation before new work can be safely added.
On the newer end, 11.6% of Plain City’s housing units were built in 2010 or later, representing an active new-construction and infill segment. These properties are more likely to require EV charger rough-ins, 200A service from the outset, and AFCI protection on branch circuits per the 2023 NEC, which Utah has adopted statewide. The combination of an aging pre-1980 majority and a growing new-construction share produces the mixed service demand that Caddis’s scope range is built to address.
Electrical services for Plain City residents
Serving Plain City residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Plain City, answered
Is there a licensed electrician serving Plain City, UT?+
Caddis Electric is a licensed Utah residential and commercial electrician with completed work in Plain City (ZIP 84404) and active dispatch availability from Springville, UT via I-15 north. The team holds a Utah electrical contractor license and pulls permits through Plain City Building Services for all applicable scopes.
How much does EV charger installation cost in Plain City, UT?+
A Level 2 (240V) EV charger installation in Plain City typically runs $800 to $2,500 for a straightforward install; runs requiring a long cable run or a subpanel upgrade can reach $2,500 to $4,000. Actual cost depends on panel capacity, distance from the panel to the garage or parking area, and whether a load-calculation review identifies a need for service upgrade. Contact Caddis Electric for a site-specific estimate.
What does a panel upgrade cost in Plain City, UT?+
A standard 200A residential panel upgrade in Plain City runs $2,800 to $4,500. If the utility requires a new service entrance, which is common on 1970s and 1980s homes, total cost can reach $5,500 to $8,000. Plain City Building Services requires a permit and inspection before re-energizing. Caddis pulls permits and coordinates inspections as part of the panel upgrade scope.
Do I need a permit for electrical work in Plain City, UT?+
Yes. Plain City Building Services requires permits for most electrical scopes including panel upgrades, new circuits, EV charger installs, generator hookups, and remodel electrical work. Permit issuance for standard scopes typically takes 24 to 72 hours after application; inspections are generally scheduled within 2 to 5 business days. Caddis Electric handles permit applications and inspection coordination on all applicable jobs.
Who services aluminum-wiring homes in Plain City?+
Caddis Electric performs aluminum branch-circuit remediation in Plain City, including CO/ALR device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Census ACS 2023 Table B25034 identifies approximately 3,060 Plain City homes built during the 1970s, the primary aluminum-wiring era. Per-device remediation typically runs $75 to $150; full-home rewire ranges from $8,000 to $18,000 depending on scope.
Can Caddis Electric install a generator in Plain City, UT?+
Yes. Caddis installs standby generators and automatic transfer switches (ATS) in Plain City, with all bonding completed per NEC Article 702. A whole-home standby generator installation (18 to 26 kW) typically runs $8,000 to $15,000 including the ATS. A transfer switch for a portable generator runs $800 to $2,000. Permits are pulled through Plain City Building Services.
How long does an electrical permit take in Plain City?+
Plain City Building Services typically issues permits for standard electrical scopes within 24 to 72 hours after application. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Caddis Electric submits permit applications and tracks inspection status on every permitted job in Plain City.
Does Caddis handle remodel electrical work in Plain City?+
Yes. Caddis Electric performs remodel electrical work in Plain City including GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions, and dedicated circuit installations. Given that 43.8% of Plain City’s housing stock predates 1980 per Census ACS 2023 Table B25034, remodel scopes in the area frequently surface code-deficiency corrections alongside the primary project work.
What share of Plain City homes are from the aluminum-wiring era?+
According to Census ACS 2023 Table B25034, approximately 12.8% of Plain City’s housing units (roughly 3,060 homes) were built during the 1970s, the decade when aluminum branch-circuit wiring was most common in residential construction. Homeowners in these properties should have outlets, switches, and fixtures inspected for CO/ALR-rated devices or proper pigtail terminations before adding load or completing a sale.
Does Caddis Electric serve the Plain City area even though it is based in Springville?+
Yes. Caddis Electric dispatches from Springville, UT and serves Plain City as part of its broader Wasatch Front service territory, which includes Salt Lake, Utah, Wasatch, and Davis counties. Plain City sits in Weber County, north of Davis County; dispatch routing runs I-15 north through Salt Lake City and continues to the Ogden area. One job has been completed in Plain City since August 2025, and the team accepts new service requests in the 84404 ZIP code.
across 19 Google reviews
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Plain City, ZCTA 84404)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Plain City Building Services — permits and inspections for electrical work in Plain City, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
