← All Service Areas

Monthly Service Report · Updated November 2, 2026

Electrician in Saratoga Springs

Licensed, permit-pulled electrical work for homes and businesses in and around Saratoga Springs.

License #12846504-5501National Electrical Code 2023 (NEC)4.8★ · 19 reviews
5
Jobs completed
4.8★
19 Google reviews
NEC 2023
Code adherence
Licensed
#12846504-5501
This Month's Report

What the team did in Saratoga Springs

5

electrical jobs completed in Saratoga Springs — all permit-pulled and inspected

Caddis Electric is a licensed Utah residential and commercial electrician actively serving Saratoga Springs, UT (ZIP 84045). The team has completed 5 jobs in Saratoga Springs since August 2025, spanning panel upgrades (100A-to-200A service increases, meter base replacement), EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs), remodel electrical (GFCI/AFCI code-compliance retrofits, circuit additions), generator installation (automatic transfer switch installation, bonding per NEC Article 702), and troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation). All work is permit-pulled through the Saratoga Springs City Building Department with required inspection before wall cover or energizing.

September 2026 recorded 0 completed Saratoga Springs jobs in Caddis’s JobTread history, compared to 2 jobs in September 2025: the Back Nine job completed 2025-09-26, and a Heater Rewire job completed 2025-09-04. Both of the September 2025 jobs fall within ZIP 84045. The full 5-job total since August 2025 reflects active but early-stage market presence in this fast-growing Utah County city.

Across these 5 Saratoga Springs jobs, Caddis has handled multiple distinct electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions); generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702); and troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation). The near-zero pre-1980 share documented in Census ACS 2023 Table B25034 through the dominant 2010-or-later new-construction phase maps directly to this scope mix, where new-construction coordination, load-growth panel work, and EV infrastructure are the primary drivers rather than aluminum-wiring or knob-and-tube remediation.

This report reflects Caddis’s completed Saratoga Springs work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Residential Level 2 (240V) EV charger installation similar to Caddis Electric's work in Saratoga Springs, UT
EV charger installation — representative Caddis Electric work
Service Area

Getting to Saratoga Springs

Dispatched from Springville, UT

Saratoga Springs is a rapidly growing city in Utah County, situated on the western shore of Utah Lake and bordered by Eagle Mountain to the west and Lehi to the north. The city falls within the Alpine School District, one of the largest school districts in Utah. Saratoga Springs sits at the southern edge of the Silicon Slopes technology corridor, a stretch of high-growth employment centers running from Lehi south through American Fork and into the broader Utah Valley. The city’s expansion across the Saratoga Springs bench and toward the lake shore has made it one of the fastest-growing municipalities in Utah County over the past decade. Caddis Electric dispatches from Springville, UT, reaching Saratoga Springs via I-15 north to the SR-73 interchange in Lehi, then west on SR-73 into the city.

Caddis Electric service area map
Dot size reflects Caddis’s all-time job count per city. Caddis also serves Afton, WY and Star Valley Ranch, WY in Lincoln County, Wyoming (outside the map frame).
Local Context

About Saratoga Springs’s housing stock

Saratoga Springs carries one of the newest housing stocks on the Wasatch Front. Census ACS 2023 Table B25034 reports 11,273 total housing units, with 55.3% built in 2010 or later. That figure means more than half the city’s homes are under 16 years old, a profile that shapes electrical demand toward capacity additions and EV infrastructure rather than legacy-system remediation. New or near-new construction in this age range is typically wired with copper branch circuits to NEC standards of the 2000s and 2010s, but load growth from electric vehicles, home offices, and high-draw kitchen appliances frequently pushes original 100A or 150A panels to their practical limits.

The aluminum-wiring risk window, generally homes built between 1965 and 1973, accounts for roughly 0.5% of Saratoga Springs housing units, or approximately 56 homes per Census ACS 2023 Table B25034. That is a narrow slice compared to cities with 1970s development cores. Where aluminum branch-circuit wiring does exist in Saratoga Springs, the standard remediation approach is CO/ALR device replacement or copper pigtail terminations using COPALUM or AlumiConn connectors at each device location. Full-home rewire is typically reserved for cases where the aluminum wiring is significantly degraded or where a remodel opens walls throughout the home.

Knob-and-tube era wiring, associated with homes built before 1939, is effectively absent in Saratoga Springs: Census ACS 2023 Table B25034 reports 0 housing units in that age band. The electrical challenges in Saratoga Springs are therefore concentrated in the new-construction and early post-2000 segments: service entrance sizing for high-load households, EV charger circuit planning, AFCI and GFCI retrofits required by code updates, and generator transfer-switch installation as homeowners add backup power in response to regional grid events.

Who You're Working With

Serving Saratoga Springs residents

Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.

Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com

BBB Accredited Caddis Electric LLC

Common Questions

Electrical work in Saratoga Springs, answered

Is there a licensed electrician serving Saratoga Springs, UT?+

Caddis Electric is a licensed Utah residential and commercial electrician that has completed 5 jobs in Saratoga Springs (84045) since August 2025. The company is based in Springville, UT, and pulls permits through the Saratoga Springs City Building Department for all permitted scopes.

How much does EV charger installation cost in Saratoga Springs, UT?+

A Level 2 (240V) EV charger install in Saratoga Springs typically runs $800 to $2,500 for a straightforward installation; expect $2,500 to $4,000 if the run requires a long cable distance or a subpanel upgrade. Actual cost depends on panel capacity, conduit routing, and whether a load-calculation review identifies available capacity.

What does a panel upgrade cost in Saratoga Springs, UT?+

A standard 200A residential panel upgrade in Saratoga Springs runs approximately $2,800 to $4,500. If Rocky Mountain Power requires a new service entrance as part of the upgrade, total cost can reach $5,500 to $8,000. Caddis pulls all required permits through the Saratoga Springs City Building Department and coordinates inspection before energizing.

Do I need a permit for electrical work in Saratoga Springs, UT?+

Yes. Panel upgrades, new circuit additions, EV charger installs, generator transfer switches, and most remodel electrical work require a permit from the Saratoga Springs City Building Department. Standard permits are typically issued within 24 to 72 hours of application, with inspection scheduling available within 2 to 5 business days after issuance.

Who services aluminum-wiring homes in Saratoga Springs, UT?+

Caddis Electric handles aluminum branch-circuit remediation in Saratoga Springs, including CO/ALR device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Per Census ACS 2023 Table B25034, only about 56 homes in Saratoga Springs fall in the 1970 to 1979 aluminum-wiring era, so this scope is less common here than in older Utah County cities.

Can Caddis Electric install a generator in Saratoga Springs, UT?+

Caddis installs standby generators in Saratoga Springs, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. Whole-home standby generator installs (18 to 26 kW) typically run $8,000 to $15,000 including the ATS; a portable generator transfer-switch install runs $800 to $2,000. Permits are pulled through the Saratoga Springs City Building Department.

How long does an electrical permit take in Saratoga Springs, UT?+

The Saratoga Springs City Building Department typically issues standard electrical permits within 24 to 72 hours of a complete application. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Complex commercial or new-construction scopes may require additional plan review time.

Does Caddis Electric handle remodel electrical work in Saratoga Springs, UT?+

Caddis has completed remodel electrical work in Saratoga Springs, covering GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and dedicated circuit installs. All remodel work is permitted through the Saratoga Springs City Building Department and inspected before wall cover per NEC requirements.

What electrical work does Caddis Electric do in Saratoga Springs?+

Across 5 Saratoga Springs jobs since August 2025, Caddis has handled panel upgrades, EV charger installation, remodel electrical, generator installation with automatic transfer switch, and troubleshooting and service calls. The city’s dominant new-construction housing stock means most demand centers on load-growth panel work, EV infrastructure, and AFCI/GFCI retrofits rather than legacy-wiring remediation.

How much does a service call or electrical diagnostic cost in Saratoga Springs, UT?+

A trip-and-diagnose service call in Saratoga Springs typically runs $150 to $300 flat for most residential scopes. That covers circuit tracing, breaker diagnostics, and intermittent fault isolation. Repair labor is billed separately once the fault is identified.

Does the new construction in Saratoga Springs require specialized electrical services?+

Census ACS 2023 Table B25034 shows 55.3% of Saratoga Springs housing units were built in 2010 or later. Homes in this age range are copper-wired and code-compliant at time of build, but load growth from EV chargers, home offices, and high-draw appliances frequently pushes original service panels toward capacity limits. Caddis handles load-calculation reviews and panel upgrades for this exact scenario.

4.8★★★★★

across 19 Google reviews

Sources

  • U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Saratoga Springs, ZCTA 84045)
  • National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
  • Saratoga Springs City Building Department — permits and inspections for electrical work in Saratoga Springs, UT

Monthly report by Caddis Electric · last updated November 2, 2026.

Need an electrician for your Utah home?

Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.

(801) 348-9201
Schedule Estimate