← All Service Areas

Monthly Service Report · Updated November 2, 2026

Electrician in Highland

Licensed, permit-pulled electrical work for homes and businesses in and around Highland.

License #12846504-5501National Electrical Code 2023 (NEC)4.8★ · 19 reviews
11
Jobs completed
4.8★
19 Google reviews
NEC 2023
Code adherence
Licensed
#12846504-5501
This Month's Report

What the team did in Highland

11

electrical jobs completed in Highland — all permit-pulled and inspected

Caddis Electric is a licensed Utah residential and commercial electrician actively serving Highland, UT (ZIP 84003). The team has completed 11 jobs in Highland since August 2025, spanning EV charger installation (240V dedicated circuits, Level 2 EVSE, load-calculation panel reviews), server-room and dedicated-circuit work (isolated grounding, surge suppression, clean-power circuits), remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions), panel upgrades (100A-to-200A service increases, meter base replacement), and aluminum branch-circuit remediation (CO/ALR device replacement, copper pigtail terminations with COPALUM or AlumiConn connectors). All work is permit-pulled through Highland City Building Services with required inspection before wall cover or energizing.

September 2026 produced 2 completed jobs in Highland, up from 1 job recorded in September 2025, the Croft remodel job on 2025-09-10. The September 2026 work consisted of two same-day jobs on 2026-09-09: the Hoskins EV install and the Hoskins Server Room circuit, both in the 84003 zip code. That single-day pairing is consistent with a coordinated multi-scope service visit, though the exact project boundaries are defined by the individual job records.

Across these 11 Highland jobs, Caddis has handled multiple distinct electrical scopes: EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); dedicated circuits for server rooms and high-draw equipment (isolated grounding, surge suppression, clean-power circuits); remodel electrical (GFCI/AFCI code-compliance retrofits, circuit additions); panel upgrades (100A-to-200A service increases, main breaker swaps); and aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors). The pre-1980 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.

This report reflects Caddis’s completed Highland work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Residential Level 2 (240V) EV charger installation similar to Caddis Electric's work in Highland, UT
EV charger installation — representative Caddis Electric work
Service Area

Getting to Highland

Dispatched from Springville, UT

Highland is a city in northern Utah County, bordered by Alpine to the north, Cedar Hills to the west, and American Fork to the southwest, all within the Lone Peak corridor of the Wasatch Front. The city sits at the base of the Wasatch Range and falls within the Alpine School District, one of the largest public school districts in Utah. Highland’s position along the northern edge of Utah County places it within the broader Silicon Slopes technology corridor, an area that has seen sustained residential growth and increasing demand for EV infrastructure and dedicated high-draw circuits. The city’s elevation and proximity to the mountains create seasonal weather patterns that affect outdoor electrical installations, including standby generator tie-ins and weatherproof RV outlet enclosures. Caddis Electric dispatches from Springville, UT, reaching Highland via I-15 north to the SR-92 interchange near American Fork, then east toward Alpine and Highland.

Caddis Electric service area map
Dot size reflects Caddis’s all-time job count per city. Caddis also serves Afton, WY and Star Valley Ranch, WY in Lincoln County, Wyoming (outside the map frame).
Local Context

About Highland’s housing stock

Census ACS 2023 Table B25034 documents 16,441 total housing units in Highland, UT. Of those, 28.7 percent were built in 2010 or later, reflecting sustained new-construction activity that drives demand for new-construction wiring, service entrance coordination, and EV charger rough-ins during build-out. At the same time, 29.2 percent of the housing stock predates 1980, a segment that concentrates panel upgrade work, aluminum-wiring remediation, and GFCI/AFCI retrofit demand.

The 1970-to-1979 build cohort accounts for 14.1 percent of Highland’s housing units, approximately 2,318 homes according to Census ACS 2023 Table B25034. Homes built during that decade frequently feature aluminum branch-circuit wiring, installed when copper prices peaked and builders substituted aluminum as a cost measure. Aluminum wiring requires specific termination hardware (CO/ALR-rated devices or COPALUM and AlumiConn connectors) to prevent oxidation and loose connections at receptacles and switches. Electricians unfamiliar with NEC Article 310 requirements for aluminum conductors should not perform remediation on these homes.

The pre-1939 segment represents 3.2 percent of Highland’s housing units, approximately 526 homes, and carries knob-and-tube wiring risk. Knob-and-tube circuits lack a ground conductor, are not rated for modern insulation contact, and are incompatible with AFCI protection requirements under NEC 2023. Homes in this cohort that have had insulation blown into wall cavities over original knob-and-tube runs present a fire-risk condition that requires full evaluation before any additional load is added. Highland’s active new-development phases continue to add units to the 2010-and-later cohort, reinforcing the split demand profile the 11 completed Caddis jobs reflect.

Who You're Working With

Serving Highland residents

Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.

Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com

BBB Accredited Caddis Electric LLC

Common Questions

Electrical work in Highland, answered

Is there a licensed electrician serving Highland, UT?+

Caddis Electric is a licensed Utah residential and commercial electrician that has completed 11 jobs in Highland (84003) since August 2025. All work is permit-pulled through Highland City Building Services with required inspection before wall cover or energizing.

How much does EV charger installation cost in Highland, UT?+

A standard Level 2 (240V) EV charger installation in Highland typically runs $800 to $2,500; that range increases to $2,500 to $4,000 if a long cable run or subpanel upgrade is required. Caddis completed an EV charger install in Highland on 2026-09-09; actual pricing depends on panel capacity, circuit distance, and conduit routing confirmed at the time of estimate.

What does a panel upgrade cost in Highland, UT?+

A standard 100A-to-200A residential panel upgrade in Highland runs $2,800 to $4,500; if the utility requires a new service entrance, which is common on pre-1980 homes, the range rises to $5,500 to $8,000. Highland’s housing stock includes 29.2 percent pre-1980 units per Census ACS 2023 Table B25034, making service-entrance evaluation a routine part of panel upgrade scoping here.

Do I need a permit for electrical work in Highland, UT?+

Yes. Electrical permits in Highland are issued by Highland City Building Services. For standard scopes, permit issuance typically takes 24 to 72 hours after application, with inspection scheduling available 2 to 5 business days after issuance. Caddis pulls all required permits before beginning work.

Who services aluminum-wiring homes in Highland, UT?+

Caddis Electric performs aluminum branch-circuit remediation in Highland, including CO/ALR device replacement in 1970s-era builds and copper pigtail terminations using COPALUM or AlumiConn connectors per NEC requirements. Approximately 2,318 Highland homes were built between 1970 and 1979 according to Census ACS 2023 Table B25034, making this one of the more common scopes in the area. Remediation cost runs $75 to $150 per outlet or device for connector replacement, or $8,000 to $18,000 for a full-home rewire depending on scope.

Can Caddis Electric install a generator in Highland, UT?+

Yes. Caddis installs standby and backup generators in Highland, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator (18 to 26 kW) with ATS typically costs $8,000 to $15,000; a portable generator transfer-switch install runs $800 to $2,000. Scope and cost depend on generator sizing, fuel type, and existing panel configuration.

How long does an electrical permit take in Highland City?+

Highland City Building Services typically issues standard electrical permits within 24 to 72 hours of application. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Complex or commercial scopes may require additional review time.

Does Caddis handle remodel electrical in Highland, UT?+

Yes. Caddis completed a remodel job in Highland on 2025-09-10 (the Croft remodel job) and has handled remodel electrical across its 11 Highland jobs since August 2025. Remodel scopes include GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring where required.

Does Caddis Electric handle server-room or dedicated-circuit work in Highland?+

Yes. Caddis completed a server-room dedicated-circuit job in Highland on 2026-09-09 (the Hoskins Server Room job). Server-room and high-draw equipment circuits include isolated grounding, surge suppression, and clean-power circuit configurations. These scopes are permit-pulled through Highland City Building Services.

What is the risk of aluminum wiring in Highland, UT homes built in the 1970s?+

Approximately 2,318 Highland homes were built between 1970 and 1979 per Census ACS 2023 Table B25034, and many of those use aluminum branch-circuit wiring. Aluminum oxidizes at device terminations over time, creating loose connections and elevated fire risk. NEC-compliant remediation requires CO/ALR-rated devices or COPALUM and AlumiConn copper pigtail connectors; standard brass-terminal devices are not rated for aluminum conductors. A licensed electrician should assess the termination condition before adding load to any 1970s circuit.

How many electrical jobs has Caddis Electric completed in Highland, UT?+

Caddis Electric has completed 11 jobs in Highland, UT (84003) since August 2025. September 2026 alone included 2 jobs: an EV charger install and a server-room dedicated-circuit job, both completed on 2026-09-09.

4.8★★★★★

across 19 Google reviews

Sources

  • U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Highland, ZCTA 84003)
  • National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
  • Highland City Building Services — permits and inspections for electrical work in Highland, UT

Monthly report by Caddis Electric · last updated November 2, 2026.

Need an electrician for your Utah home?

Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.

(801) 348-9201
Schedule Estimate