← All Service Areas

Monthly Service Report · Updated November 2, 2026

Electrician in Springville

Licensed, permit-pulled electrical work for homes and businesses in and around Springville.

License #12846504-5501National Electrical Code 2023 (NEC)4.8★ · 19 reviews
10
Jobs completed
4.8★
19 Google reviews
NEC 2023
Code adherence
Licensed
#12846504-5501
This Month's Report

What the team did in Springville

10

electrical jobs completed in Springville — all permit-pulled and inspected

Caddis Electric is a licensed Utah residential and commercial electrician actively serving Springville, UT (ZIP 84663). The team has completed 10 jobs in Springville since August 2025, spanning panel upgrades, EV charger installation, remodel electrical, aluminum branch-circuit remediation, dedicated circuits, and generator installation. All work is permit-pulled through Springville City Building Codes and Permits with required inspection before wall cover or energizing.

Springville recorded 0 jobs in September 2026 and 0 jobs in September 2025. The full 10-job total accumulated across the broader August 2025 through October 2026 reporting window in ZIP 84663. Because Caddis is headquartered in Springville, the team dispatches to Springville calls with no travel-time barrier, and the job mix reflects the full range of residential and commercial scopes the crew handles across Utah County.

Across these 10 Springville jobs, Caddis has handled a range of distinct electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions); aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors); dedicated circuits (isolated grounding, surge suppression, clean-power circuits); and generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702). The pre-1939 knob-and-tube segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.

This report reflects Caddis’s completed Springville work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Residential standby backup generator installation similar to Caddis Electric's work in Springville, UT
Standby generator installation — representative Caddis Electric work
Service Area

Getting to Springville

Dispatched from Springville, UT

Springville is a city in Utah County, bordered by Provo to the north, Spanish Fork to the south, and the Wasatch Range to the east. The city sits near the mouth of Spanish Fork Canyon and carries strong ties to the broader south Utah County corridor. Mapleton lies immediately to the east, and the community shares the Nebo School District with Spanish Fork and other surrounding municipalities. The Provo River and Utah Lake are regional natural landmarks within close reach. Springville is also home to the Springville Museum of Art, one of the oldest art museums in Utah, giving the city a distinct cultural identity within Utah County. Caddis Electric dispatches from Springville, UT, making this the team’s home market with zero additional drive time required for most service calls within city limits.

Caddis Electric service area map
Dot size reflects Caddis’s all-time job count per city. Caddis also serves Afton, WY and Star Valley Ranch, WY in Lincoln County, Wyoming (outside the map frame).
Local Context

About Springville’s housing stock

Census ACS 2023 Table B25034 shows Springville’s 11,025 housing units span a wide age range that directly shapes the electrical work the team encounters. Approximately 35.3 percent of the housing stock was built before 1980, meaning more than 3,800 units predate modern NEC panel and branch-circuit standards. Of that older segment, roughly 13.3 percent of all units (approximately 1,466 homes) date to the 1970s, the decade when aluminum branch-circuit wiring was widely installed in residential construction across Utah. Aluminum wiring in those homes requires CO/ALR-rated devices or COPALUM/AlumiConn copper pigtail terminations at every outlet and switch to meet current code and reduce fire risk at connection points.

At the older end of the spectrum, approximately 7.4 percent of Springville housing units (roughly 816 homes) were built before 1939. Structures of that era may retain original knob-and-tube wiring or have received partial updates over the decades, often resulting in mixed-generation systems that require careful circuit tracing and code-compliance review before any remodel or panel work. These older homes also frequently carry 60A or 100A service panels that are undersized for modern load demands including EV charging, heat pumps, and home-office circuits.

On the newer end, 16.1 percent of Springville units were built in 2010 or later, reflecting ongoing residential development in the city. New-construction scopes in this segment include whole-house rough-in, service entrance coordination with Rocky Mountain Power, and trim-out and final inspection. The combination of a substantial older-housing base and an active new-construction share produces the broad service scope Caddis handles across Springville, from aluminum-wiring remediation in mid-century neighborhoods to Level 2 EV charger installs in newer subdivisions.

Housing age profile

11,025 total units · Census ACS 2023 (B25034)

35.3%
48.6%
16.1%
Before 1980 35.3%1980–2009 48.6%2010 or later 16.1%

Eras that drive remediation work

1970s — aluminum branch-circuit era13.3% · ~1,466 homes
Pre-1939 — knob-and-tube era7.4% · ~816 homes

Bars show each era’s share of the total stock (not additive). The 1980–2009 band is derived as 100 − the two shares Census reports.

Who You're Working With

Serving Springville residents

Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.

Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com

BBB Accredited Caddis Electric LLC

Common Questions

Electrical work in Springville, answered

Is there a licensed electrician serving Springville, UT?+

Caddis Electric is a licensed Utah residential and commercial electrician based in Springville, UT (84663) and has completed 10 jobs there since August 2025. Because Springville is Caddis’s home city, the team dispatches without additional travel time for most service calls within city limits.

How much does EV charger installation cost in Springville, UT?+

A standard Level 2 (240V) EV charger installation in Springville typically runs $800 to $2,500; jobs requiring a long cable run or a subpanel upgrade can reach $2,500 to $4,000. Actual cost depends on panel capacity, cable distance, and whether a load-calculation review identifies available amperage or requires an upgrade. Caddis can assess panel headroom during the initial visit.

What does a 200-amp panel upgrade cost in Springville, UT?+

A standard 200A residential panel upgrade in Springville runs $2,800 to $4,500; if Rocky Mountain Power requires a new service entrance (common on 1970s and 1980s homes), the range rises to $5,500 to $8,000. Springville City Building Codes and Permits requires a permit and inspection for all panel replacement work. Exact scope determines final cost.

Do I need a permit for electrical work in Springville, UT?+

Yes. Springville City Building Codes and Permits requires permits for panel upgrades, service changes, new circuits, remodel electrical, EV charger installs, and generator hookups. Caddis pulls all required permits through Springville City and schedules the required inspection before any wall cover or energizing. Permit issuance on standard scopes typically takes 24 to 72 hours after application.

Who services aluminum-wiring homes in Springville, UT?+

Caddis Electric performs aluminum branch-circuit remediation in Springville, including CO/ALR device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Per Census ACS 2023 Table B25034, approximately 1,466 Springville homes (13.3 percent of the housing stock) date to the 1970s, the primary aluminum-wiring era. Device-level remediation typically costs $75 to $150 per outlet or switch; full-home rewire ranges from $8,000 to $18,000 depending on home size and existing wiring condition.

Can Caddis Electric install a generator in Springville, UT?+

Yes. Caddis installs standby and backup generators in Springville, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator (18 to 26 kW) with ATS typically costs $8,000 to $15,000 installed. Portable generator transfer-switch installs run $800 to $2,000. All generator work is permitted through Springville City Building Codes and Permits.

How long does an electrical permit take in Springville, UT?+

Springville City Building Codes and Permits typically issues permits within 24 to 72 hours of application for standard residential electrical scopes. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Complex commercial or new-construction scopes may require additional plan-review time. Caddis manages the permit application and inspection coordination on all jobs.

Does Caddis Electric handle remodel electrical in Springville, UT?+

Yes. Caddis handles remodel electrical in Springville, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and dedicated circuit installs for high-draw equipment. All remodel electrical work is permitted through Springville City Building Codes and Permits and inspected before wall cover. GFCI/AFCI retrofit work typically runs $150 to $300 per circuit.

What portion of Springville homes have older electrical systems that may need upgrading?+

Census ACS 2023 Table B25034 shows that 35.3 percent of Springville’s 11,025 housing units were built before 1980, and approximately 7.4 percent (roughly 816 homes) predate 1939. Pre-1980 homes frequently carry 60A or 100A service panels undersized for modern loads, and 1970s-era homes (13.3 percent of the stock, approximately 1,466 units) may have aluminum branch-circuit wiring. Owners of these homes should request an electrical assessment before adding EV chargers, heat pumps, or significant remodel circuits.

What is the service call or diagnostic fee for an electrician in Springville, UT?+

A standard trip-and-diagnose service call in Springville typically runs $150 to $300 flat for most residential diagnostic visits, covering circuit tracing, breaker diagnostics, and intermittent fault isolation. Because Caddis is headquartered in Springville, there is no additional travel charge for calls within city limits. Repair costs beyond the diagnostic visit depend on the scope identified.

Does Caddis Electric serve new-construction projects in Springville, UT?+

Yes. Caddis handles new-construction wiring in Springville, including whole-house rough-in, service entrance coordination with the utility, and trim-out and final inspection. Census ACS 2023 Table B25034 shows 16.1 percent of Springville’s housing stock was built in 2010 or later, reflecting ongoing residential development in the city. All new-construction electrical work is permitted and inspected through Springville City Building Codes and Permits.

4.8★★★★★

across 19 Google reviews

Sources

  • U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Springville, ZCTA 84663)
  • National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
  • Springville City Building Codes and Permits — permits and inspections for electrical work in Springville, UT

Monthly report by Caddis Electric · last updated November 2, 2026.

Need an electrician for your Utah home?

Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.

(801) 348-9201
Schedule Estimate