Monthly Service Report · Updated November 2, 2026
Electrician in Benjamin
Licensed, permit-pulled electrical work for homes and businesses in and around Benjamin.
What the team did in Benjamin
electrical job completed in Benjamin — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Benjamin, UT (ZIP 84660). The team has completed 1 job in Benjamin since August 2025, with service capabilities spanning panel upgrades (100A-to-200A service increases, meter base replacement), EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs), aluminum branch-circuit remediation (CO/ALR device replacement, copper pigtail terminations), generator installation (standby/backup power, automatic transfer switch installation), and remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions). All work is permit-pulled through Utah County Community Development with required inspection before wall cover or energizing.
Benjamin falls within unincorporated Utah County, serviced under Utah County Community Development jurisdiction (utahcounty.gov). Through the report period ending October 19, 2026, Caddis records show 1 job completed in the 84660 zip code since tracking began in August 2025. September 2026 recorded 0 jobs, matching the September 2025 baseline of 0 jobs, reflecting Benjamin’s status as an emerging service area rather than a high-volume market for Caddis at this stage.
Across the 1 Benjamin job on record, Caddis has demonstrated readiness to handle the full range of electrical scopes relevant to this housing market: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps), EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews), aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors), generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702), remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions), troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation), and new-construction wiring (whole-house rough-in, service entrance coordination with utility, trim-out and final inspection). The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Benjamin work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Benjamin
Benjamin is an unincorporated rural community in southern Utah County, situated south of Spanish Fork and north of Santaquin along the eastern edge of the Utah Lake basin. The area sits within the Nebo School District boundary and falls under Utah County jurisdiction rather than any incorporated municipality. The surrounding region is characterized by agricultural land transitioning toward residential development, consistent with broader southern Utah County growth patterns. Benjamin is accessible from US-6 and state routes serving the Spanish Fork and Payson corridors. Caddis Electric dispatches from Springville, UT, reaching Benjamin via I-15 south to the Spanish Fork or Payson exits, then via local county roads into the unincorporated Benjamin area.
About Benjamin’s housing stock
Census ACS 2023 Table B25034 counts 13,162 total housing units in the Benjamin area (84660). Of those, 25.9 percent were built before 1980, representing a meaningful segment of older stock that commonly presents with undersized panels, outdated branch-circuit wiring, and devices not rated for modern load demands. The 1970s cohort alone accounts for approximately 9.2 percent of the housing stock, or roughly 1,211 homes built during the aluminum branch-circuit wiring era. Homes in that vintage frequently used aluminum for 15A and 20A branch circuits, a practice discontinued after fire-risk findings; those circuits require CO/ALR-rated devices or copper pigtail remediation under current NEC standards.
On the older end, approximately 4.8 percent of Benjamin-area housing units, or roughly 632 homes, predate 1939 and may contain knob-and-tube wiring. Knob-and-tube systems lack a grounding conductor, are not compatible with modern AFCI or GFCI protection requirements, and are frequently flagged by insurance carriers. Owners of these properties typically face a choice between targeted remediation of high-risk circuits and staged whole-home rewiring.
The new-construction share is also significant: 20.6 percent of Benjamin-area housing units were built in 2010 or later, reflecting active residential development in southern Utah County. New builds require whole-house rough-in, service entrance coordination with the utility, and trim-out and final inspection before certificate of occupancy. That combination, a sizable legacy stock requiring remediation alongside active new construction, creates a broad electrical service profile that aligns with the full scope of work Caddis Electric performs in unincorporated Utah County.
Housing age profile
Eras that drive remediation work
Bars show each era’s share of the total stock (not additive). The 1980–2009 band is derived as 100 − the two shares Census reports.
Electrical services for Benjamin residents
Serving Benjamin residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Benjamin, answered
Is there a licensed electrician serving Benjamin, UT?+
Yes. Caddis Electric is a licensed Utah residential and commercial electrician that serves Benjamin, UT (84660) under Utah County Community Development jurisdiction. The company is based in Springville, UT and holds licensure for both residential and commercial electrical work throughout Utah County, Salt Lake County, Wasatch County, and Davis County.
How much does EV charger installation cost in Benjamin, UT?+
A standard Level 2 (240V) EV charger installation in Benjamin typically runs $800 to $2,500 for a straightforward install with an existing adequate panel. If a long cable run or subpanel upgrade is required, costs can reach $2,500 to $4,000. Utah County Community Development requires a permit for new dedicated circuits; actual project cost depends on panel capacity, conduit run length, and EVSE equipment selected.
What does a panel upgrade cost in Benjamin, UT?+
A standard 100A-to-200A residential panel upgrade in the Benjamin area runs $2,800 to $4,500. On homes from the 1970s and 1980s, where the utility may require a new service entrance, costs can reach $5,500 to $8,000. All panel upgrades require a permit through Utah County Community Development and a passing inspection before the panel is energized.
Do I need a permit for electrical work in Benjamin, UT?+
Yes. Benjamin is unincorporated Utah County, so electrical permits are pulled through Utah County Community Development (utahcounty.gov). Standard permit applications are typically processed within 24 to 72 hours, and inspection scheduling after permit issuance runs 2 to 5 business days. Work covered under permit includes panel upgrades, new circuits, EV charger installs, and generator connections.
Who services aluminum-wiring homes in Benjamin, UT?+
Caddis Electric performs aluminum branch-circuit remediation in Benjamin, UT, including CO/ALR device replacement in 1970s-era homes and copper pigtail terminations using COPALUM or AlumiConn connectors. Census ACS 2023 Table B25034 places approximately 1,211 Benjamin-area homes in the 1970s build decade, the primary aluminum branch-circuit wiring era. Per-device remediation typically costs $75 to $150; full-home rewire ranges from $8,000 to $18,000 depending on scope.
Can Caddis Electric install a generator in Benjamin, UT?+
Yes. Caddis Electric installs standby and backup generators in Benjamin, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator install (18 to 26 kW) typically runs $8,000 to $15,000 including the ATS. A portable generator transfer-switch install runs $800 to $2,000. All generator connections require a permit through Utah County Community Development.
How long does an electrical permit take in Utah County?+
Utah County Community Development typically issues standard electrical permits within 24 to 72 hours of application. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Timelines can vary during high-volume construction periods in southern Utah County.
Does Caddis handle remodel electrical in Benjamin, UT?+
Yes. Caddis Electric performs remodel electrical work in Benjamin including GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions, and dedicated circuit installations. GFCI/AFCI retrofits typically run $150 to $300 per circuit. All remodel electrical work in unincorporated Benjamin requires a permit through Utah County Community Development.
Are knob-and-tube wiring homes common in Benjamin, UT?+
Census ACS 2023 Table B25034 estimates approximately 632 Benjamin-area housing units predate 1939, the era associated with knob-and-tube wiring. Knob-and-tube systems lack a grounding conductor and are incompatible with modern AFCI and GFCI requirements. Many insurance carriers flag or surcharge these properties. Caddis Electric performs targeted remediation and staged whole-home rewiring for pre-1939 homes in the 84660 zip code.
Does Caddis Electric serve unincorporated Utah County areas like Benjamin?+
Yes. Caddis Electric holds licensure for electrical work throughout Utah County, including unincorporated areas such as Benjamin. Permits for unincorporated Benjamin are pulled through Utah County Community Development at utahcounty.gov. Caddis dispatches from Springville, UT, with direct access to the Benjamin area via I-15 and local county roads.
What new-construction electrical work does Caddis perform in Benjamin, UT?+
Caddis Electric provides new-construction wiring services in Benjamin including whole-house rough-in, service entrance coordination with the utility, and trim-out and final inspection before certificate of occupancy. Census ACS 2023 Table B25034 indicates 20.6 percent of Benjamin-area housing units were built in 2010 or later, reflecting continued residential development in the area. All new-construction electrical work requires permit approval through Utah County Community Development.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Benjamin, ZCTA 84660)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Utah County Community Development (unincorporated Benjamin) — permits and inspections for electrical work in Benjamin, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
