Monthly Service Report · Updated November 2, 2026
Electrician in Kamas
Licensed, permit-pulled electrical work for homes and businesses in and around Kamas.
What the team did in Kamas
electrical jobs completed in Kamas — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Kamas, UT (ZIP 84036). The team has completed 2 jobs in Kamas since August 2025, spanning panel upgrades, EV charger installation, remodel electrical, generator installation, and aluminum branch-circuit remediation. All work is permit-pulled through the Kamas City Building Department with required inspection before wall cover or energizing.
As of the September 2026 report period, Caddis recorded 0 jobs in Kamas during September 2026 and 0 jobs during September 2025. Both completed jobs in the historical record fall under ZIP 84036, reflecting dispatches to the Kamas area since Caddis began tracking field activity in JobTread in August 2025. The low job count reflects Kamas’s geographic position at the eastern edge of Wasatch County rather than any gap in service coverage; the team dispatches to 84036 on demand.
Across these 2 Kamas jobs, Caddis has handled electrical scopes that include panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps), EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews), remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions), generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702), and aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors). The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Kamas work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Kamas
Kamas is a small city in eastern Wasatch County, situated at the mouth of the Uinta Basin and at the base of the Uinta Mountains along the upper Provo River corridor. It sits roughly 15 miles east of Heber City and serves as the western gateway to the Uinta-Wasatch-Cache National Forest. The city falls within the South Summit School District and shares regional identity with the broader Summit County recreational economy, including proximity to Park City to the northwest via US-189 and SR-248. Adjacent communities include Oakley to the north, Francis to the south, and Marion within the Kamas Valley. The area’s economy blends agriculture, tourism, and second-home ownership tied to outdoor recreation access. Caddis Electric dispatches from Springville, UT, reaching Kamas via US-189 north through Provo Canyon to Heber City, then continuing east on US-40 and SR-189 through the Kamas Valley.
About Kamas’s housing stock
According to Census ACS 2023 Table B25034, Kamas has 3,972 total housing units. The dominant share, 38.3 percent, was built in 2010 or later, reflecting sustained new-construction activity driven by second-home demand and population growth in the Uinta Basin corridor. New construction at this scale typically generates electrical work in the form of whole-house rough-in, service entrance coordination with Rocky Mountain Power, trim-out and final inspection, and EV charger pre-wire during build-out.
The pre-1980 segment accounts for 19.7 percent of Kamas housing stock. Within that cohort, approximately 222 homes (5.6 percent of total units) were built during the 1970s, the aluminum branch-circuit wiring era. Homes in that vintage frequently present CO/ALR device mismatches at outlets and switches, a condition that requires copper pigtail terminations using COPALUM crimps or AlumiConn connectors to restore NEC-compliant connections. An additional 282 homes (7.1 percent of total units) predate 1939, placing them in the knob-and-tube era. Knob-and-tube wiring lacks a ground conductor, is incompatible with GFCI and AFCI protection, and is routinely flagged by insurers and home inspectors. Remediation in these structures ranges from targeted GFCI/AFCI retrofits to full-home rewiring depending on scope.
The combination of a large new-construction share and a meaningful older-housing tail creates a wide electrical service range in Kamas: from service entrance upgrades on 1970s cabins to rough-in coordination on new builds in active subdivisions. Census ACS 2023 Table B25034 data for Kamas confirms this bimodal distribution, which aligns with the mixed scope Caddis encounters when dispatching to 84036.
Electrical services for Kamas residents
Serving Kamas residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Kamas, answered
Is there a licensed electrician serving Kamas, UT?+
Yes. Caddis Electric is a licensed Utah residential and commercial electrician that actively serves Kamas, UT (84036) and holds the required state electrical contractor license. The team dispatches from Springville, UT via US-189 through Provo Canyon and has completed jobs in the Kamas area since August 2025.
How much does EV charger installation cost in Kamas, UT?+
A standard Level 2 EV charger installation (240V dedicated circuit) runs $800 to $2,500 in the Utah Wasatch Front and Wasatch County market for a straightforward install. Longer cable runs or situations requiring a subpanel upgrade can push the total to $2,500 to $4,000. Caddis pulls the required permit through the Kamas City Building Department for all EV charger work.
What does a panel upgrade cost in Kamas, UT?+
A standard 200A residential panel upgrade typically runs $2,800 to $4,500 in the Utah market. If Rocky Mountain Power requires a new service entrance, which is common on 1970s and 1980s homes, the total can reach $5,500 to $8,000. Kamas has approximately 222 homes from the 1970s era (Census ACS 2023 Table B25034) where service entrance replacement is more frequently needed.
Do I need a permit for electrical work in Kamas, UT?+
Yes. Electrical permits in Kamas are issued through the Kamas City Building Department. Most standard scopes, including panel upgrades, EV charger installs, and circuit additions, receive permit issuance within 24 to 72 hours after application, with inspection scheduling typically available 2 to 5 business days after permit issuance. Caddis handles permit application and inspection coordination for all jobs in 84036.
Who services aluminum-wiring homes in Kamas, UT?+
Caddis Electric services aluminum branch-circuit wiring in Kamas, UT. Approximately 222 Kamas homes were built during the 1970s aluminum-wiring era (Census ACS 2023 Table B25034). Remediation involves CO/ALR device replacement and copper pigtail terminations using COPALUM crimps or AlumiConn connectors at each outlet and switch, priced at $75 to $150 per device for targeted work or $8,000 to $18,000 for a full-home rewire.
Can Caddis Electric install a generator in Kamas, UT?+
Yes. Caddis installs standby and backup generators in Kamas, UT, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator installation (18 to 26 kW) typically runs $8,000 to $15,000 including the ATS. A portable generator transfer-switch install runs $800 to $2,000. All work is permitted through the Kamas City Building Department.
How long does an electrical permit take in Kamas, UT?+
The Kamas City Building Department typically issues permits for standard electrical scopes within 24 to 72 hours after application. Inspection scheduling after permit issuance is generally available within 2 to 5 business days. Complex scopes or new-construction service entrance coordination with Rocky Mountain Power may require additional lead time.
Does Caddis handle remodel electrical in Kamas, UT?+
Yes. Caddis Electric handles remodel electrical work in Kamas, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring. Kamas has approximately 282 pre-1939 homes (Census ACS 2023 Table B25034) where remodel work frequently involves knob-and-tube remediation alongside circuit upgrades. All remodel work is permitted through the Kamas City Building Department.
Does Caddis Electric serve Wasatch County, including Kamas?+
Yes. Kamas, UT (84036) is explicitly within Caddis Electric’s Wasatch County service area. The team dispatches from Springville, UT via US-189 through Provo Canyon and has active job history in the Kamas area since August 2025.
What electrical issues are common in older Kamas homes?+
Kamas has two distinct older-home cohorts that present recurring electrical issues. The roughly 222 homes built in the 1970s (Census ACS 2023 Table B25034) frequently have aluminum branch-circuit wiring with improperly rated devices, a fire-hazard condition requiring CO/ALR connector replacement or copper pigtailing. The approximately 282 homes built before 1939 often retain knob-and-tube wiring, which lacks ground conductors, is incompatible with modern GFCI and AFCI protection, and is flagged by most homeowner insurers. Both conditions require licensed remediation.
How much does a service call or electrical diagnostic cost in Kamas, UT?+
A trip-and-diagnose service call in Kamas, UT typically runs $150 to $300 flat for most residential diagnostic visits, including circuit tracing, breaker diagnostics, and intermittent fault isolation. Travel time from Springville via Provo Canyon is a factor for Kamas; confirm current dispatch rates with Caddis directly when scheduling.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Kamas, ZCTA 84036)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Kamas City Building Department — permits and inspections for electrical work in Kamas, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
