Monthly Service Report · Updated November 2, 2026
Electrician in Park City
Licensed, permit-pulled electrical work for homes and businesses in and around Park City.
What the team did in Park City
electrical jobs completed in Park City — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Park City, UT (ZIP 84060 and 84098). The team has completed 3 jobs in Park City since August 2025, spanning panel upgrades, EV charger installation, aluminum branch-circuit remediation, remodel electrical, and generator installation. All work is permit-pulled through the Park City Building Department with required inspection before wall cover or energizing.
Park City logged 0 jobs in September 2026 and 0 jobs in the September 2025 baseline period. The 3 completed jobs on record since August 2025 represent Caddis’s active footprint in Summit County, covering both the 84060 and 84098 ZIP codes. No specific job dates or named jobs were recorded in the September 2026 report window.
Across these 3 Park City jobs, Caddis has handled a range of electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps), EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews), aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors), remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions), and generator installation (standby/backup power, automatic transfer switch (ATS) installation, bonding per NEC Article 702). The pre-1939 segment through the active 2010-or-later new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Park City work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Park City
Park City sits in Summit County, Utah, at elevations ranging from approximately 6,900 to over 7,000 feet in the Wasatch Mountains, roughly 30 miles east of Salt Lake City. The city borders the Wasatch Back communities of Snyderville Basin and is adjacent to Kimball Junction, which falls within the 84098 ZIP code and functions as the commercial and residential growth corridor for the greater Park City area. The Park City area is served by the Park City School District. Major nearby landmarks include the Deer Valley Resort and Park City Mountain Resort ski areas, the Utah Olympic Park (a training and competition facility in the 84098 ZIP), and the Swaner Nature Preserve in Snyderville Basin. Park City is accessed from the Wasatch Front via I-80 eastbound and is part of the broader Summit County recreational and resort economy. Caddis Electric dispatches from Springville, UT, reaching Park City via I-15 northbound to I-80 eastbound through Parley’s Canyon, exiting at the Kimball Junction interchange (Exit 145) for the 84098 ZIP or continuing to the SR-224 exit (Exit 148) for the 84060 downtown core.
About Park City’s housing stock
Census ACS 2023 Table B25034 counts 19,014 total housing units in Park City. Approximately 14% were built in 2010 or later, reflecting ongoing resort-adjacent residential development in communities like Jordanelle, Promontory, and the Snyderville Basin. This new-construction share drives demand for service entrance coordination, whole-house rough-in, and trim-out inspections consistent with current NEC 2023 code adoption in Utah.
The 1970s aluminum-wiring era accounts for 13.9% of Park City’s housing stock, approximately 2,643 homes by Census count. Properties in this cohort were frequently wired with aluminum branch circuits, which are subject to connection-point oxidation and require CO/ALR-rated devices or COPALUM/AlumiConn pigtail terminations to meet current safety standards. Summit County’s resort and second-home market means many of these properties have had multiple owners and varying levels of deferred maintenance, making circuit-level assessment particularly relevant.
The pre-1980 segment as a whole represents 16.5% of Park City’s housing stock, and the pre-1939 cohort accounts for approximately 1.1% (roughly 209 units). While the knob-and-tube era is a smaller share than in older Utah valley cities, these historic Old Town Park City properties present the most complex remediation scenarios, often requiring full rewires, hazard flagging, and coordination with the Park City Building Department before any renovation work can proceed. The 14% new-construction share on the other end of the spectrum signals continued demand for EV charger infrastructure, dedicated circuits, and panel capacity reviews as resort-area buyers install high-draw equipment in newer builds.
Electrical services for Park City residents
Serving Park City residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Park City, answered
Is there a licensed electrician serving Park City, UT?+
Caddis Electric is a licensed Utah electrician with completed jobs in Park City (ZIP 84060 and 84098) since August 2025. The team pulls permits through the Park City Building Department and schedules required inspections before energizing or covering walls.
How much does EV charger installation cost in Park City, UT?+
A Level 2 (240V) EV charger installation in Park City typically runs $800 to $2,500 for a straightforward install; runs requiring a long cable pull or a subpanel upgrade can reach $2,500 to $4,000. These are typical Utah Wasatch Front ranges for 2026 and actual cost depends on panel capacity, conduit routing, and whether a load-calculation review identifies the need for additional panel work.
What does a panel upgrade cost in Park City, UT?+
A standard 200A residential panel upgrade in Park City runs $2,800 to $4,500. On 1970s and 1980s homes where the utility requires a new service entrance, the range rises to $5,500 to $8,000. Park City’s resort and second-home stock often includes older service equipment that benefits from a full meter base and main breaker review at the time of upgrade.
Do I need a permit for electrical work in Park City, UT?+
Yes. The Park City Building Department requires permits for most electrical work, including panel upgrades, new circuits, and EV charger installs. Permit issuance for standard scopes typically takes 24 to 72 hours after application, with inspection scheduling available within 2 to 5 business days. Caddis pulls all permits and coordinates inspections before wall cover or energizing.
Who services aluminum-wiring homes in Park City, UT?+
Caddis Electric services aluminum-wiring homes in Park City. Census ACS 2023 Table B25034 estimates approximately 2,643 Park City housing units were built during the 1970s aluminum-wiring era. Remediation typically involves CO/ALR-rated device replacement or copper pigtail terminations using COPALUM or AlumiConn connectors, priced at $75 to $150 per outlet or device for targeted work.
Can Caddis Electric install a generator in Park City, UT?+
Yes. Caddis installs standby generators in Park City, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator (18 to 26 kW) with ATS typically costs $8,000 to $15,000 installed. A portable generator transfer-switch install runs $800 to $2,000. Park City’s mountain location and winter storm exposure make backup power a practical consideration for full-time and second-home owners.
How long does an electrical permit take in Park City, UT?+
The Park City Building Department typically issues permits for standard electrical scopes within 24 to 72 hours of application. Inspection scheduling after permit issuance is generally available within 2 to 5 business days. Complex commercial or high-density resort projects may require additional plan review time.
Does Caddis handle remodel electrical in Park City, UT?+
Yes. Caddis handles remodel electrical in Park City, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring. Park City’s mix of historic Old Town properties and newer resort-adjacent builds means remodel scopes range from knob-and-tube hazard remediation in pre-1939 structures to clean-power circuit additions in post-2010 construction.
What share of Park City homes may have aluminum branch-circuit wiring?+
Census ACS 2023 Table B25034 shows 13.9% of Park City’s 19,014 housing units were built between 1970 and 1979, the primary aluminum branch-circuit era. That translates to approximately 2,643 units. Homes in this cohort should be assessed for CO/ALR device compatibility before any renovation or panel work, particularly in Park City’s active second-home resale market.
Does Caddis Electric serve the Kimball Junction area and the 84098 ZIP code?+
Yes. Caddis Electric’s Park City service area covers both the 84060 and 84098 ZIP codes, including the Kimball Junction commercial and residential corridor in the 84098 zone. The team dispatches from Springville via I-15 north to I-80 east, exiting at Kimball Junction (Exit 145) for the 84098 area.
How much does a service call or electrical diagnostic cost in Park City, UT?+
Most trip-and-diagnose service calls run $150 to $300 flat. This covers circuit tracing, breaker diagnostics, and intermittent fault isolation. Actual cost depends on scope and travel; Park City’s distance from Caddis’s Springville base may affect scheduling and dispatch windows.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Park City, ZCTA 84060, 84098)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Park City Building Department — permits and inspections for electrical work in Park City, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
