← All Service Areas

Monthly Service Report · Updated November 2, 2026

Electrician in Midway

Licensed, permit-pulled electrical work for homes and businesses in and around Midway.

License #12846504-5501National Electrical Code 2023 (NEC)4.8★ · 19 reviews
3
Jobs completed
4.8★
19 Google reviews
NEC 2023
Code adherence
Licensed
#12846504-5501
This Month's Report

What the team did in Midway

3

electrical jobs completed in Midway — all permit-pulled and inspected

Caddis Electric is a licensed Utah residential and commercial electrician actively serving Midway, UT (ZIP 84049). The team has completed 3 jobs in Midway since August 2025, spanning panel upgrades, EV charger installation, remodel electrical, aluminum branch-circuit remediation, and troubleshooting and service calls. All work is permit-pulled through the Midway City Building Department with required inspection before wall cover or energizing.

Through the report period ending October 19, 2026, Caddis logged 0 jobs in Midway during September 2026, matching the 0-job baseline from September 2025. The full 3-job history recorded in Caddis’s JobTread system since August 2025 covers work in ZIP 84049, Wasatch County. No individual job dates were provided in the source data for this report period.

Across these 3 Midway jobs, Caddis has handled multiple distinct electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); remodel electrical (GFCI/AFCI code-compliance retrofits, circuit additions); aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors); and troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation). The pre-1939 segment through the active 2010-and-later new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.

This report reflects Caddis’s completed Midway work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Residential electrical panel upgrade similar to work Caddis Electric performs in Midway, UT
Panel upgrade — representative Caddis Electric work
Service Area

Getting to Midway

Dispatched from Springville, UT

Midway is a small city in Wasatch County, Utah, situated in Heber Valley at roughly 5,600 feet elevation, bordered by Heber City to the southeast and positioned near the Wasatch Mountains and Deer Creek Reservoir. The area falls within the Wasatch County School District and draws significant recreational interest tied to Soldier Hollow and Wasatch Mountain State Park. Midway sits east of Utah County across the Wasatch Range, placing it outside the immediate Salt Lake Valley but within Caddis’s established Wasatch County service territory. Caddis Electric dispatches from Springville, UT, reaching Midway via US-189 northbound through Provo Canyon to Heber City, then west on SR-113 into Midway.

Caddis Electric service area map
Dot size reflects Caddis’s all-time job count per city. Caddis also serves Afton, WY and Star Valley Ranch, WY in Lincoln County, Wyoming (outside the map frame).
Local Context

About Midway’s housing stock

Census ACS 2023 Table B25034 counts 3,331 total housing units in Midway, UT (84049). Of those, 27.4 percent were built in 2010 or later, reflecting an active new-construction phase that generates consistent demand for new-construction wiring, service entrance coordination, and EV charger rough-ins as buyers move into finished homes. This cohort typically presents straightforward 200-amp service and modern panel configurations, but load-calculation reviews are still common as homeowners add Level 2 EVSE, hot tubs, and home-office dedicated circuits after move-in.

At the other end of the housing-stock timeline, 14.8 percent of Midway units predate 1980, including approximately 230 homes (6.9 percent of total units) built during the 1970s aluminum-wiring era. Aluminum branch-circuit wiring installed in that decade is a documented fire-hazard risk at receptacle and switch terminations; remediation options include CO/ALR device replacement at each outlet and switch location or full copper pigtail terminations using COPALUM or AlumiConn connectors. Roughly 40 units (1.2 percent) fall in the pre-1939 knob-and-tube era, a cohort that frequently requires full-home rewiring when homeowners pursue remodel work or updated homeowners insurance coverage. Both pre-1980 segments represent the higher-complexity diagnostic and remediation work that pull-permit tradespeople handle under Midway City Building Department oversight.

Who You're Working With

Serving Midway residents

Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.

Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com

BBB Accredited Caddis Electric LLC

Common Questions

Electrical work in Midway, answered

Is there a licensed electrician serving Midway, UT?+

Yes. Caddis Electric is a licensed Utah residential and commercial electrician that has completed 3 jobs in Midway (ZIP 84049) since August 2025. The company is based in Springville, UT, holds a Utah state electrical contractor license, and pulls permits through the Midway City Building Department for all applicable scopes.

How much does EV charger installation cost in Midway, UT?+

A straightforward Level 2, 240V EV charger install in the Midway area typically runs $800 to $2,500. If the run from the main panel is long or a subpanel upgrade is required, costs can reach $2,500 to $4,000. Actual pricing depends on panel capacity, wire run distance, and conduit requirements; a load-calculation review is part of every Caddis EV charger quote.

What does a panel upgrade cost in Midway, UT?+

A standard 100A-to-200A residential panel upgrade in the Midway, UT area runs $2,800 to $4,500. If the utility requires a new service entrance, which is common on 1970s and 1980s homes, costs can reach $5,500 to $8,000. Midway City Building Department requires a permit and inspection for panel upgrade work.

Do I need a permit for electrical work in Midway, UT?+

Yes. The Midway City Building Department requires permits for panel upgrades, new circuits, service changes, EV charger installs, and most remodel electrical work. Permit issuance for standard scopes typically takes 24 to 72 hours after application, with inspection scheduling available 2 to 5 business days after issuance. Caddis pulls all required permits before beginning work.

Who services aluminum-wiring homes in Midway, UT?+

Caddis Electric services aluminum-wiring homes in Midway (84049). Census ACS 2023 Table B25034 places approximately 230 Midway homes in the 1970s aluminum-wiring era. Remediation options include CO/ALR device replacement at $75 to $150 per outlet or switch and full copper pigtail terminations using COPALUM or AlumiConn connectors; whole-home rewires run $8,000 to $18,000 depending on home size and existing conditions.

Can Caddis Electric install a generator in Midway, UT?+

Yes. Caddis installs standby and backup generators in Midway, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator in the 18 to 26 kW range typically costs $8,000 to $15,000 installed, including the ATS. A portable generator transfer-switch install runs $800 to $2,000. All generator work is permitted through the Midway City Building Department.

How long does an electrical permit take in Midway, UT?+

The Midway City Building Department typically issues permits for standard electrical scopes within 24 to 72 hours of application. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Complex commercial or new-construction scopes may require additional plan review time.

Does Caddis handle remodel electrical in Midway, UT?+

Yes. Remodel electrical is among the scopes Caddis has performed in Midway (84049). This includes GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring. All remodel electrical work is permitted through the Midway City Building Department and inspected before wall cover.

What electrical issues are common in Midway’s older homes?+

The two primary risk categories in Midway’s older housing stock are aluminum branch-circuit wiring in homes built during the 1970s (approximately 230 units per Census ACS 2023 Table B25034) and knob-and-tube wiring in the roughly 40 pre-1939 units. Aluminum termination failures at outlets and switches are a documented fire risk; CO/ALR connector replacement or COPALUM/AlumiConn pigtailing are the standard remediation paths. Knob-and-tube homes typically require full rewiring when remodel work or insurance renewal is pursued.

Does Caddis Electric serve Wasatch County, including Midway and Heber City?+

Yes. Wasatch County is part of Caddis Electric’s established service territory. The company dispatches from Springville, UT via US-189 through Provo Canyon to reach Midway (84049) and neighboring Heber City. Permits for Midway work are pulled through the Midway City Building Department; Heber City work falls under its own building authority.

What is the service call and diagnostic fee for an electrician in Midway, UT?+

A standard trip-and-diagnose service call in the Midway area runs $150 to $300 flat for most residential diagnostic visits. This covers circuit tracing, breaker diagnostics, and intermittent fault isolation. Travel distance from Springville via US-189 through Provo Canyon may affect scheduling availability for same-day calls.

4.8★★★★★

across 19 Google reviews

Sources

  • U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Midway, ZCTA 84049)
  • National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
  • Midway City Building Department — permits and inspections for electrical work in Midway, UT

Monthly report by Caddis Electric · last updated November 2, 2026.

Need an electrician for your Utah home?

Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.

(801) 348-9201
Schedule Estimate