Monthly Service Report · Updated November 2, 2026
Electrician in Heber City
Licensed, permit-pulled electrical work for homes and businesses in and around Heber City.
What the team did in Heber City
electrical jobs completed in Heber City — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Heber City, UT (ZIP 84032). The team has completed 19 jobs in Heber City since August 2025, spanning panel upgrades, EV charger installation, remodel electrical, generator installation, aluminum branch-circuit remediation, and dedicated circuits. All work is permit-pulled through the Heber City Building Department with required inspection before wall cover or energizing.
September 2026 recorded zero completed Heber City jobs, compared to one job in September 2025: the Benloch Lot 67 job on 2025-09-18. The full 19-job history across ZIP 84032 represents Caddis’s active presence in the Heber Valley market since August 2025, with the year-over-year September comparison reflecting normal seasonal variation in a market where new-development lot work and remodel scheduling can shift month to month.
Across these 19 Heber City jobs, Caddis has handled multiple distinct electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions); generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702); aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors); and dedicated circuits (isolated grounding, surge suppression, clean-power circuits). The pre-1939 knob-and-tube-era segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Heber City work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Heber City
Heber City is the county seat of Wasatch County, situated at approximately 5,600 feet elevation in the Heber Valley, east of Utah County across the Wasatch Range. Adjacent communities include Midway to the northwest, Daniel to the south, and Charleston to the west along the Provo River corridor. The city sits roughly 18 miles east of Provo via Provo Canyon, placing it within Wasatch County’s distinct mountain-valley character that sets it apart from the urbanized I-15 corridor. The Heber Valley is bounded by the Wasatch and Uinta mountain ranges, with Deer Creek Reservoir to the west serving as a recognized regional landmark. The area falls within the Wasatch School District. Caddis Electric dispatches from Springville, UT, reaching Heber City via US-189 through Provo Canyon.
About Heber City’s housing stock
Heber City’s housing stock reflects two distinct eras that drive very different electrical scopes. According to Census ACS 2023 Table B25034, 28.5 percent of Heber City’s 9,929 housing units were built in 2010 or later, representing a substantial new-construction share that generates demand for service-entrance coordination with utility, whole-house rough-in, and trim-out work. At the same time, 22.9 percent of units were built before 1980, and 7.8 percent (approximately 774 homes) predate 1939, putting a meaningful portion of the housing stock in the knob-and-tube era. Knob-and-tube wiring was not rated for modern load demands, lacks a grounding conductor, and is frequently incompatible with today’s insulation and circuit-breaker panels; remediation typically requires whole-home rewiring or targeted GFCI/AFCI retrofits.
The aluminum-wiring risk window is also present in Heber City’s stock. Census ACS 2023 Table B25034 identifies 7.7 percent of units (approximately 765 homes) as built during the 1970s, the decade when aluminum branch-circuit wiring was common in residential construction. Aluminum wiring requires CO/ALR-rated devices or COPALUM and AlumiConn connector pigtails at every termination point; standard brass devices are not compatible and present a documented fire risk. Homeowners in Heber City’s 1970s-era neighborhoods who have not had an aluminum-wiring assessment should treat that as a priority inspection item.
The 28.5 percent new-construction share also reflects the Heber Valley’s continued growth as a destination community for second-home buyers and full-time residents relocating from the Wasatch Front. New lots and new builds require new-construction wiring services including whole-house rough-in, service entrance coordination with Rocky Mountain Power, and final inspection through the Heber City Building Department. The Benloch Lot 67 job recorded on 2025-09-18 is consistent with this new-development activity in the area.
Housing age profile
9,929 total units · Census ACS 2023 (B25034)
Eras that drive remediation work
Bars show each era’s share of the total stock (not additive). The 1980–2009 band is derived as 100 − the two shares Census reports.
Electrical services for Heber City residents
Serving Heber City residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Heber City, answered
Is there a licensed electrician serving Heber City, UT?+
Caddis Electric is a licensed Utah residential and commercial electrician with 19 completed jobs in Heber City (84032) since August 2025. The company is based in Springville, UT and reaches Heber City via US-189 through Provo Canyon, dispatching for panel upgrades, EV charger installs, remodel electrical, generator installation, and other scopes.
How much does EV charger installation cost in Heber City, UT?+
A Level 2, 240V EV charger installation in the Heber City area typically runs $800 to $2,500 for a straightforward install; costs increase to $2,500 to $4,000 if a long cable run or subpanel upgrade is required. Actual pricing depends on panel capacity, distance from panel to parking location, and whether a load-calculation review identifies additional work. Contact Caddis Electric for a site-specific quote.
What does a panel upgrade cost in Heber City, UT?+
A standard 200A residential panel upgrade in the Heber City area runs $2,800 to $4,500; if Rocky Mountain Power requires a new service entrance (common on 1970s and 1980s homes), the range increases to $5,500 to $8,000. Heber City’s housing stock includes roughly 765 homes built in the 1970s (per Census ACS 2023 Table B25034), many of which are candidates for service upgrades. Permit is pulled through the Heber City Building Department.
Do I need a permit for electrical work in Heber City, UT?+
Yes. Electrical permits for Heber City are issued by the Heber City Building Department (heberut.gov). Standard permit applications are typically processed in 24 to 72 hours, with inspection scheduling available 2 to 5 business days after issuance. Caddis Electric pulls all required permits before beginning work and coordinates final inspection before any wall cover or energizing.
Who services aluminum-wiring homes in Heber City?+
Caddis Electric performs aluminum branch-circuit remediation in Heber City, including CO/ALR device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Per Census ACS 2023 Table B25034, approximately 765 Heber City homes were built during the 1970s, the primary aluminum-wiring construction era. Per-device remediation typically runs $75 to $150; full-home rewiring ranges from $8,000 to $18,000 depending on scope.
Can Caddis Electric install a generator in Heber City, UT?+
Yes. Caddis Electric installs standby generators and automatic transfer switches (ATS) in Heber City. A whole-home standby generator (18 to 26 kW) with ATS typically runs $8,000 to $15,000 installed; a portable generator transfer-switch install runs $800 to $2,000. All generator bonding follows NEC Article 702 and permit is pulled through the Heber City Building Department.
How long does an electrical permit take in Heber City?+
The Heber City Building Department (heberut.gov) typically issues standard electrical permits within 24 to 72 hours of application. Inspection scheduling after permit issuance generally takes 2 to 5 business days. Project timelines vary based on scope and seasonal demand; confirm current lead times directly with the building department.
Does Caddis Electric handle remodel electrical in Heber City?+
Yes. Caddis Electric handles remodel electrical in Heber City, including GFCI/AFCI code-compliance retrofits and kitchen and bath circuit additions. GFCI/AFCI retrofit work typically runs $150 to $300 per circuit. With 22.9 percent of Heber City’s housing stock predating 1980 (Census ACS 2023 Table B25034), remodel projects in older homes frequently require code-compliance upgrades alongside finish electrical work.
Does Caddis Electric serve new construction lots in Heber City?+
Yes. Caddis Electric provides new-construction wiring services in Heber City, including whole-house rough-in, service entrance coordination with the utility, and trim-out through final inspection with the Heber City Building Department. The Benloch Lot 67 job completed on 2025-09-18 is an example of new-development work the team has performed in the area. Census ACS 2023 Table B25034 shows 28.5 percent of Heber City’s 9,929 housing units were built in 2010 or later, reflecting continued lot development in the Heber Valley.
What is the service call cost for an electrician in Heber City, UT?+
A standard trip-and-diagnose service call in the Heber City area typically runs $150 to $300 flat. This covers circuit tracing, breaker diagnostics, and intermittent fault isolation. Travel distance from Caddis’s Springville base via US-189 through Provo Canyon may affect scheduling availability; contact Caddis Electric to confirm current availability for Wasatch County calls.
What zip code does Caddis Electric serve in Heber City?+
Caddis Electric serves Heber City under ZIP code 84032. The team has completed 19 jobs in this ZIP code since August 2025, covering residential and commercial scopes including panel upgrades, EV charger installation, remodel electrical, and generator installation.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Heber City, ZCTA 84032)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Heber City Building Department — permits and inspections for electrical work in Heber City, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
