Monthly Service Report · Updated November 2, 2026
Electrician in Santaquin
Licensed, permit-pulled electrical work for homes and businesses in and around Santaquin.
What the team did in Santaquin
electrical jobs completed in Santaquin — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Santaquin, UT (ZIP 84655). The team has completed 2 jobs in Santaquin since August 2025, spanning panel upgrades, EV charger installation, generator installation, remodel electrical, and aluminum branch-circuit remediation. All work is permit-pulled through Santaquin City Building Department with required inspection before wall cover or energizing.
Through the September 2026 report period, Caddis recorded 0 jobs in Santaquin in September 2026 and 0 in September 2025, meaning both completed jobs fall outside those specific months. The full 2-job Santaquin history since August 2025 is captured under ZIP 84655. Because the job record is limited at this stage, each completed Santaquin project represents a meaningful data point for the team’s routing and permit familiarity with Santaquin City Building Department.
Across these 2 Santaquin jobs, Caddis has handled electrical scopes consistent with the city’s housing mix: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps), EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews), aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors), remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions), and generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702). The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Santaquin work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Santaquin
Santaquin sits in the southern end of Utah County, bordered by Payson to the north and the Juab County line to the south. The city occupies a position along the Wasatch Front corridor where US-6 and I-15 converge, giving it geographic ties to both the broader Utah County labor market and the rural southern reaches of the Wasatch Front. Santaquin City is served by the Nebo School District, the same district covering Payson, Spanish Fork, and Salem. The Santaquin area sits at the foot of the Wasatch Range foothills, with Mount Nebo to the southeast serving as a regional landmark. Growth pressure from Utah County’s southward expansion has pushed new subdivisions into Santaquin, contributing to the city’s significant new-construction housing share. Caddis Electric dispatches from Springville, UT, reaching Santaquin via I-15 south approximately 15 miles through Payson.
About Santaquin’s housing stock
Census ACS 2023 Table B25034 counts 4,721 total housing units in Santaquin, UT (84655). Of those, 38 percent were built in 2010 or later, reflecting the sustained new-construction wave that has reshaped the city’s residential footprint over the past 15 years. New construction at that scale typically means active demand for new-construction wiring (whole-house rough-in, service entrance coordination with Rocky Mountain Power, trim-out and final inspection) alongside EV charger installation as homeowners configure garages in newly built homes.
The pre-1980 segment accounts for 17.3 percent of Santaquin housing units. Within that segment, approximately 330 homes date to the 1970s, the decade associated with aluminum branch-circuit wiring under federal programs that briefly approved aluminum as a substitute for copper in residential branch circuits. Homes in this era frequently require CO/ALR device replacement or copper pigtail terminations using COPALUM or AlumiConn connectors to bring outlets and switches into safe operating condition. An additional approximately 307 Santaquin homes predate 1939, representing the knob-and-tube era. Knob-and-tube wiring is ungrounded and was never designed for modern load demands; homes in this category often surface during remodel projects or pre-sale inspections when walls are opened and the original wiring is discovered.
The combination of a large new-construction cohort and a meaningful pre-1980 tail means Santaquin electricians see two distinct demand streams: rough-in and panel work on new builds and remediation or upgrade work on older stock. Census ACS 2023 Table B25034 confirms both segments are present in Santaquin at measurable scale, which aligns with the scope mix Caddis has handled across its completed Santaquin jobs.
Electrical services for Santaquin residents
Serving Santaquin residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Santaquin, answered
Is there a licensed electrician serving Santaquin, UT?+
Yes. Caddis Electric is a licensed Utah residential and commercial electrician that has completed jobs in Santaquin, UT (84655) since August 2025. The team pulls permits through Santaquin City Building Department and schedules inspections before wall cover or energizing on every project.
How much does EV charger installation cost in Santaquin, UT?+
A Level 2, 240V EV charger installation in Santaquin typically runs $800 to $2,500 for a straightforward install; if a long cable run or subpanel upgrade is required, the range is $2,500 to $4,000. These are typical Utah Wasatch Front figures for 2026. Actual cost depends on panel capacity, garage layout, and conduit length, so a site visit is the most reliable way to get a firm number.
What does a panel upgrade cost in Santaquin, UT?+
A standard 200A residential panel upgrade in Santaquin runs $2,800 to $4,500. If Rocky Mountain Power requires a new service entrance, the range increases to $5,500 to $8,000, a scenario common on 1970s and 1980s homes. Santaquin’s pre-1980 housing stock makes service-entrance evaluation a regular part of panel upgrade scoping in this city.
Do I need a permit for electrical work in Santaquin, UT?+
Yes. Permits for electrical work in Santaquin are issued by Santaquin City Building Department (santaquin.org). Standard scopes typically receive permit issuance within 24 to 72 hours of application, with inspection scheduling available 2 to 5 business days after issuance. Caddis Electric pulls permits on all Santaquin jobs before work begins.
Who services aluminum-wiring homes in Santaquin, UT?+
Caddis Electric performs aluminum branch-circuit remediation in Santaquin, UT (84655). The work includes CO/ALR device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Census ACS 2023 Table B25034 identifies approximately 330 Santaquin homes built in the 1970s, the primary aluminum-wiring era, making this a relevant service category for the city.
Can Caddis Electric install a generator in Santaquin, UT?+
Caddis Electric installs standby generators and automatic transfer switches (ATS) in Santaquin, UT. A whole-home standby generator installation in the 18 to 26 kW range typically costs $8,000 to $15,000 including the ATS, bonded per NEC Article 702. A portable generator transfer-switch install is typically $800 to $2,000. All generator work is permit-pulled through Santaquin City Building Department.
How long does an electrical permit take in Santaquin, UT?+
Santaquin City Building Department typically issues permits for standard electrical scopes within 24 to 72 hours of application. Inspection scheduling after permit issuance is generally 2 to 5 business days. Complex scopes or plan-review projects may take longer; Caddis coordinates directly with Santaquin City to confirm timing before project scheduling.
Does Caddis handle remodel electrical in Santaquin, UT?+
Yes. Caddis Electric performs remodel electrical work in Santaquin, UT (84655), including GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring. GFCI/AFCI retrofits typically run $150 to $300 per circuit. Santaquin’s pre-1939 housing segment, approximately 307 homes per Census ACS 2023 Table B25034, frequently surfaces knob-and-tube wiring during remodel projects.
What is the housing stock age breakdown in Santaquin, UT?+
Census ACS 2023 Table B25034 counts 4,721 total housing units in Santaquin, UT (84655). Of those, 38 percent were built in 2010 or later, 17.3 percent predate 1980, approximately 330 units date to the 1970s aluminum-wiring era, and approximately 307 units predate 1939. This mix drives demand for both new-construction wiring services and older-home remediation work.
How far does Caddis Electric travel to reach Santaquin, UT?+
Caddis Electric is based in Springville, UT, approximately 15 miles north of Santaquin via I-15 south through Payson. Santaquin falls within Caddis’s Utah County service area, and the team regularly dispatches to southern Utah County locations.
Does Caddis Electric serve new construction in Santaquin, UT?+
Yes. Caddis Electric performs new-construction wiring in Santaquin, UT, including whole-house rough-in, service entrance coordination with the utility, and trim-out and final inspection. With 38 percent of Santaquin’s housing stock built in 2010 or later per Census ACS 2023 Table B25034, new-construction electrical is a relevant and active service category in this city.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Santaquin, ZCTA 84655)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Santaquin City Building Department — permits and inspections for electrical work in Santaquin, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
