Monthly Service Report · Updated November 2, 2026
Electrician in Lindon
Licensed, permit-pulled electrical work for homes and businesses in and around Lindon.
What the team did in Lindon
electrical jobs completed in Lindon — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Lindon, UT (ZIP 84042). The team has completed 5 jobs in Lindon since August 2025, spanning pre-demolition disconnect, remodel electrical, panel upgrades, EV charger installation, aluminum branch-circuit remediation, and dedicated circuit work. All work is permit-pulled through Lindon City Community Development with required inspection before wall cover or energizing.
In September 2026, Caddis completed 1 job in Lindon: the Lindon Wall Demo job on 2026-09-21. That compares to 0 jobs recorded in Lindon during September 2025, marking the first September activity logged in this ZIP code. All 5 Lindon jobs on record fall within the 84042 ZIP code and have been completed since August 2025.
Across these 5 Lindon jobs, Caddis has handled a range of electrical scopes: pre-demolition disconnect (service shutdown coordination with utility, abandoned-circuit removal, hazard flagging); remodel electrical (GFCI/AFCI code-compliance retrofits, circuit additions); panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); and dedicated circuits (isolated grounding, surge suppression, clean-power circuits). The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Lindon work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Lindon
Lindon occupies a narrow band of Utah County benchland between Orem to the south and Pleasant Grove to the north, with the Wasatch Range rising immediately to the east and Utah Lake visible to the west. The city sits within the Alpine School District and shares municipal boundaries and commercial corridors with American Fork and Vineyard along the I-15 frontage. Lindon is frequently identified as part of the Silicon Slopes technology corridor; the 1200 West and Center Street corridors host a notable concentration of light-industrial and tech-office buildings that generate both commercial and mixed-use electrical demand. Caddis Electric dispatches from Springville, UT, reaching Lindon via I-15 northbound to the Lindon/Pleasant Grove exits (approximately Exit 275 or Exit 276), a direct route of roughly 12 miles under normal traffic conditions.
About Lindon’s housing stock
According to Census ACS 2023 Table B25034, Lindon’s total housing stock stands at 3,349 units. New construction built in 2010 or later accounts for 22.1 percent of that stock, reflecting the sustained residential development that has expanded the city’s footprint along the benches east of I-15. This new-construction share drives demand for service entrance coordination with the utility, whole-house rough-in, and trim-out inspections on homes that are still within their first code cycle.
The pre-1980 segment of Lindon’s housing stock represents 14.2 percent of units, with the 1970-to-1979 decade alone accounting for approximately 7 percent (roughly 234 homes by Census ACS 2023 Table B25034 estimates). Homes built during that decade are the primary aluminum branch-circuit era in Utah: aluminum wiring was widely used for branch circuits from roughly 1965 through 1973, and many of those connections have never been brought into compliance with current NEC standards requiring CO/ALR-rated devices or COPALUM/AlumiConn pigtail terminations. Owners of Lindon homes built between 1965 and 1973 should verify device compatibility before assuming the wiring is safe.
At the older end of the spectrum, approximately 2.8 percent of Lindon units (roughly 94 homes per Census ACS 2023 Table B25034) were built before 1939, placing them in the potential knob-and-tube wiring era. Knob-and-tube circuits lack a grounding conductor, are not compatible with modern GFCI or AFCI protection without rewiring, and are frequently flagged during real-estate inspections and insurance underwriting reviews. The combination of a significant new-construction share, a meaningful aluminum-wiring cohort, and a small but present pre-1939 stock is precisely what drives the mixed scope profile Caddis sees across its Lindon jobs.
Electrical services for Lindon residents
Serving Lindon residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Lindon, answered
Is there a licensed electrician serving Lindon, UT?+
Yes. Caddis Electric is a licensed Utah residential and commercial electrician with 5 completed jobs in Lindon (84042) since August 2025. The company is based in Springville, UT, and holds active licensure for residential and commercial electrical work throughout Utah County, including Lindon.
How much does EV charger installation cost in Lindon, UT?+
A Level 2 (240V) EV charger installation in Lindon typically runs $800 to $2,500 for a straightforward install with a nearby panel; costs rise to $2,500 to $4,000 if a long cable run or subpanel upgrade is required. Actual pricing depends on panel capacity, cable routing distance, and whether a load-calculation review reveals available amperage.
What does a 200-amp panel upgrade cost in Lindon, UT?+
A standard 200-amp residential panel upgrade in Lindon runs $2,800 to $4,500; if the utility requires a new service entrance, which is common on 1970s and 1980s homes, the range rises to $5,500 to $8,000. Lindon City Community Development issues the permit, and an inspection is required before the panel is energized.
Do I need a permit for electrical work in Lindon, UT?+
Yes. Permits for electrical work in Lindon are issued by Lindon City Community Development (lindoncity.org). Standard permit applications are typically processed within 24 to 72 hours, and inspection scheduling after issuance runs 2 to 5 business days. Caddis pulls all required permits before starting work.
Who services aluminum-wiring homes in Lindon?+
Caddis Electric handles aluminum branch-circuit remediation in Lindon, including CO/ALR device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Per-device remediation typically costs $75 to $150; a full-home rewire ranges from $8,000 to $18,000 depending on square footage and circuit count. Census ACS 2023 Table B25034 estimates roughly 234 Lindon homes were built during the 1970-to-1979 aluminum-wiring era.
Can Caddis Electric install a standby generator in Lindon, UT?+
Yes. Caddis installs standby generators including automatic transfer switch (ATS) wiring and bonding per NEC Article 702. A whole-home standby generator (18 to 26 kW) typically costs $8,000 to $15,000 installed; a portable generator transfer-switch install runs $800 to $2,000. Permit and inspection through Lindon City Community Development are required.
How long does an electrical permit take in Lindon, UT?+
Lindon City Community Development typically issues standard electrical permits within 24 to 72 hours of application. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Project timelines vary based on scope and inspector availability.
Does Caddis Electric handle remodel electrical work in Lindon?+
Yes. Caddis has completed remodel-related electrical work in Lindon, including the Lindon Wall Demo job on 2026-09-21, which involved pre-demolition disconnect services. Remodel electrical scopes the team handles include GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring.
What is pre-demolition electrical disconnect and why does it matter in Lindon?+
Pre-demolition disconnect involves coordinating service shutdown with the utility, removing abandoned circuits, and flagging electrical hazards before demolition work begins. It is a required safety step under NEC guidelines and must be completed and inspected before demolition crews can safely proceed. Caddis completed a pre-demolition disconnect job in Lindon on 2026-09-21.
Are there knob-and-tube wiring risks in Lindon, UT homes?+
Census ACS 2023 Table B25034 estimates approximately 94 Lindon homes (2.8 percent of total housing units) were built before 1939, placing them in the potential knob-and-tube wiring era. Knob-and-tube systems lack a grounding conductor, are incompatible with modern GFCI and AFCI protection without rewiring, and are commonly flagged during home sales and insurance underwriting. Caddis handles knob-and-tube assessment and remediation in Lindon.
How much does a service call or electrical diagnostic cost in Lindon?+
Most trip-and-diagnose service calls in Lindon run $150 to $300 as a flat visit fee, covering circuit tracing, breaker diagnostics, and intermittent fault isolation. Costs for any identified repair work are separate and depend on the scope found during diagnosis.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Lindon, ZCTA 84042)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Lindon City Community Development — permits and inspections for electrical work in Lindon, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
