Monthly Service Report · Updated November 2, 2026
Electrician in Payson
Licensed, permit-pulled electrical work for homes and businesses in and around Payson.
What the team did in Payson
electrical job completed in Payson — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Payson, UT (ZIP 84651). The team has completed 1 job in Payson since August 2025, with service capabilities spanning panel upgrades (100A-to-200A service increases), EV charger installation (Level 2 EVSE, 240V dedicated circuits), aluminum branch-circuit remediation (CO/ALR device replacement, copper pigtail terminations), generator installation (standby power with automatic transfer switch), and remodel electrical (GFCI/AFCI code-compliance retrofits, circuit additions). All work is permit-pulled through Payson City Community Development with required inspection before wall cover or energizing.
Through the September 2026 report period, Caddis logged 0 jobs in Payson during September 2026 and 0 jobs in September 2025. The single job on record in ZIP 84651 represents the team’s documented footprint in this market since tracking began in August 2025. Job volume in Payson remains early-stage relative to Caddis’s broader Utah County service area, but permit-and-inspection infrastructure through Payson City Community Development is in place and active.
Across the 1 Payson job on record, Caddis has demonstrated presence in the 84651 ZIP code with access to the full range of electrical scopes the team deploys across Utah County: panel upgrades (meter base replacement, main breaker swaps), EV charger installation (load-calculation panel reviews, Level 2 EVSE installs), aluminum branch-circuit remediation (AlumiConn connectors, COPALUM terminations for 1970s builds), generator installation (bonding per NEC Article 702, ATS installation), and remodel electrical (whole-home rewiring, kitchen and bath circuit additions). The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Payson work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Payson
Payson, UT sits at the southern end of Utah County, bordered by Salem to the north, Santaquin to the south, and the Wasatch Range to the east. The city falls within the Nebo School District and is positioned along the US-6 corridor, a primary route connecting Utah Valley to central Utah and Carbon County. Spanish Fork is the nearest significant commercial hub to the north, and the broader area identifies with south Utah County’s mix of established agricultural land and accelerating residential development. The Payson Lakes recreation area and Mount Nebo to the southeast mark the city’s eastern edge. Caddis Electric dispatches from Springville, UT, reaching Payson via I-15 south to the Payson/Salem exit (US-6 interchange), approximately 12 miles from Springville.
About Payson’s housing stock
Census ACS 2023 Table B25034 documents 8,956 total housing units in Payson, UT (84651). Of those, 34.2 percent were built before 1980, creating a substantial segment of aging electrical infrastructure that commonly requires service-entrance upgrades, circuit remediation, or full rewiring. Approximately 806 units (9 percent of total stock) date to pre-1939 construction, a cohort that may still contain knob-and-tube wiring systems. Knob-and-tube circuits lack a grounding conductor, are not compatible with GFCI protection in their original form, and present insurability challenges with many carriers. Homes in this range typically require a full assessment before any addition of load.
The 1970s cohort is the single largest risk segment in Payson’s housing stock. Census data indicates approximately 1,451 Payson homes (16.2 percent of total units) were built between 1970 and 1979, the decade when aluminum branch-circuit wiring was widely used in residential construction. Aluminum wiring is not inherently unsafe when properly maintained, but aluminum-to-device connections made with brass or steel terminals are prone to oxidation and loosening over time. NEC-compliant remediation options include CO/ALR-rated device replacement, COPALUM crimped copper pigtails, or AlumiConn connector installation at each termination point. Homes in this era should be evaluated before any significant load addition, including EV charger installs or panel upgrades.
New construction represents 20.8 percent of Payson’s housing stock, built 2010 or later, reflecting ongoing residential expansion at the south end of Utah County. New-construction scopes in this market typically involve whole-house rough-in, service entrance coordination with Rocky Mountain Power, and trim-out through final inspection. The coexistence of pre-1939 knob-and-tube stock, a large 1970s aluminum-wiring cohort, and active new-development phases means the electrical service mix in Payson spans the full spectrum from legacy remediation to new-build wiring, all documented in Census ACS 2023 Table B25034.
Housing age profile
Electrical services for Payson residents
Serving Payson residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Payson, answered
Is there a licensed electrician serving Payson, UT?+
Caddis Electric is a licensed Utah residential and commercial electrician with completed work in Payson, UT (84651) and active dispatch coverage from its Springville, UT base. The team pulls permits through Payson City Community Development and coordinates inspections before wall cover or energizing.
How much does EV charger installation cost in Payson, UT?+
A standard Level 2 EV charger installation (240V dedicated circuit) in the Payson, UT area typically runs $800 to $2,500. If the install requires a long cable run or a subpanel upgrade, the range increases to $2,500 to $4,000. Actual cost depends on panel capacity, run distance, and site conditions; a load-calculation review is standard before any EVSE install.
What does a panel upgrade cost in Payson, UT?+
A 200A residential panel upgrade in the Payson area typically costs $2,800 to $4,500 for a standard scope including meter base replacement and main breaker swap. If Rocky Mountain Power requires a new service entrance, the cost commonly rises to $5,500 to $8,000. Payson’s substantial pre-1980 housing stock (34.2 percent of units per Census ACS 2023 Table B25034) means service-entrance upgrades are a frequent add-on scope in this market.
Do I need a permit for electrical work in Payson, UT?+
Yes. Electrical permits in Payson are issued through Payson City Community Development (payson.org). Standard permit scopes typically process within 24 to 72 hours after application, with inspection scheduling available within 2 to 5 business days. Caddis Electric pulls all required permits and coordinates inspections on behalf of the customer.
Who services aluminum-wiring homes in Payson, UT?+
Caddis Electric performs aluminum branch-circuit remediation in Payson, UT, including CO/ALR-rated device replacement and copper pigtail terminations using COPALUM or AlumiConn connectors. Per Census ACS 2023 Table B25034, approximately 1,451 Payson homes were built between 1970 and 1979, the primary aluminum-wiring construction decade. Remediation cost runs $75 to $150 per outlet or device for connector replacement; full-home rewire ranges from $8,000 to $18,000 depending on home size and scope.
Can Caddis Electric install a generator in Payson, UT?+
Yes. Caddis installs standby generators and automatic transfer switches (ATS) in the Payson service area, with bonding completed per NEC Article 702. A whole-home standby generator (18 to 26 kW) with ATS typically costs $8,000 to $15,000 installed. A portable generator transfer-switch install runs $800 to $2,000. Permit is pulled through Payson City Community Development with inspection before energizing.
How long does an electrical permit take in Payson, UT?+
Payson City Community Development typically issues standard electrical permits within 24 to 72 hours after application. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Complex or commercial scopes may require additional review time; Caddis manages permit submission and inspection coordination as part of every job.
Does Caddis handle remodel electrical in Payson, UT?+
Yes. Caddis Electric performs remodel electrical in Payson, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring where needed. Payson’s pre-1939 housing stock (approximately 806 units per Census ACS 2023 Table B25034) frequently requires rewiring or grounding upgrades during remodel scopes. All remodel work is permitted through Payson City Community Development.
What share of Payson homes may have knob-and-tube wiring?+
Census ACS 2023 Table B25034 documents approximately 806 Payson housing units (9 percent of total stock) built before 1939, the era when knob-and-tube wiring was standard. Knob-and-tube systems lack a grounding conductor and are not compatible with GFCI protection in original form; they also present insurability challenges with many carriers. Caddis Electric can assess and rewire knob-and-tube systems in Payson with permits through Payson City Community Development.
How far is Caddis Electric from Payson, UT?+
Caddis Electric is based in Springville, UT, approximately 12 miles north of Payson. The team reaches Payson via I-15 south to the Payson/Salem exit at the US-6 interchange. Payson falls within Caddis’s active Utah County service area.
Does Caddis Electric serve new construction in Payson, UT?+
Yes. Caddis performs new-construction wiring including whole-house rough-in, service entrance coordination with Rocky Mountain Power, and trim-out through final inspection. New construction represents 20.8 percent of Payson’s housing stock (Census ACS 2023 Table B25034), reflecting ongoing residential development at the south end of Utah County. All new-construction work is permitted through Payson City Community Development.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Payson, ZCTA 84651)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Payson City Community Development — permits and inspections for electrical work in Payson, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
