Monthly Service Report · Updated November 2, 2026
Electrician in Millcreek
Licensed, permit-pulled electrical work for homes and businesses in and around Millcreek.
What the team did in Millcreek
electrical jobs completed in Millcreek — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Millcreek, UT (ZIP 84106, 84124). The team has completed 2 jobs in Millcreek since August 2025, spanning panel diagnostics, remodel electrical, aluminum branch-circuit remediation, GFCI and AFCI code-compliance retrofits, and dedicated circuit additions. All work is permit-pulled through Millcreek City Building Services with required inspection before wall cover or energizing.
No jobs were recorded in Millcreek during September 2026, and no September 2025 baseline exists for year-over-year comparison. The 2 total jobs on record since August 2025 both fall within ZIP codes 84106 and 84124, the two postal codes covering the incorporated city of Millcreek. Because the dataset is early-stage, individual job dates and named scopes are not published in this report period; the page will expand as additional completed work is logged.
Across these 2 Millcreek jobs, Caddis has handled electrical scopes consistent with the city’s predominantly pre-1980 housing stock: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps), aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors), remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions), and troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation). The pre-1939 segment through the modest new-development share documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Millcreek work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Millcreek
Millcreek is an incorporated city in Salt Lake County, bordered by Salt Lake City to the north and west, Murray to the south, and Holladay to the east, with the Wasatch Range forming a prominent eastern backdrop. The city sits within the Granite School District and is part of the broader Salt Lake Valley urban core, distinct from the Utah County and Silicon Slopes corridor markets where Caddis also operates. Millcreek’s urban-infill character, density of mid-century residential neighborhoods, and proximity to I-215 and I-80 make it a transit-accessible service market within Salt Lake County. Caddis Electric dispatches from Springville, UT, reaching Millcreek via I-15 north through Provo and Salt Lake City, then east on I-80 or I-215 to the neighborhood’s interior streets.
About Millcreek’s housing stock
According to Census ACS 2023 Table B25034, Millcreek’s 25,758 housing units skew heavily toward older construction: 68.3% were built before 1980, and 9.2% (approximately 2,370 homes) date to before 1939. That pre-1939 cohort represents the knob-and-tube wiring era, a period before grounded circuits became standard. Homes in this range commonly present ungrounded two-prong outlets, undersized service panels, and wiring that lacks the insulation ratings required by modern load demands. Electricians working in this segment routinely encounter the need for rewiring, GFCI protection at ungrounded outlet locations per NEC 2023 requirements, and panel replacement.
The 1970s construction cohort accounts for 10.4% of Millcreek’s housing units, or approximately 2,679 homes. This is the primary aluminum branch-circuit era in Utah residential construction. Aluminum wiring installed during this period is compatible with modern devices only when terminated with listed CO/ALR outlets and switches or with COPALUM or AlumiConn copper pigtail connectors. Homes in this cohort that still carry original terminations present a documented fire risk and are a recurring scope in Caddis’s Salt Lake County service calls. Homeowners in the 84106 and 84124 ZIP codes who are unsure of their wiring material should request a wiring inspection before adding load or replacing devices.
New construction represents only 9.5% of Millcreek’s housing stock, a low share that reflects the city’s built-out, infill character. The more active electrical demand in Millcreek derives from renovation, addition, and system-upgrade work in the existing pre-1980 base rather than from tract-home rough-in. Panel capacity upgrades are particularly common as older 60A and 100A services prove insufficient for EV chargers, heat pumps, and modern kitchen loads added to homes originally wired for far lower demand.
Electrical services for Millcreek residents
Serving Millcreek residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Millcreek, answered
Is there a licensed electrician serving Millcreek, UT?+
Yes. Caddis Electric is a licensed Utah residential and commercial electrician with completed jobs in Millcreek (ZIP 84106, 84124) since August 2025. The company pulls permits through Millcreek City Building Services and performs all work to NEC 2023 standards.
How much does EV charger installation cost in Millcreek, UT?+
A Level 2 (240V) EV charger installation in Millcreek typically runs $800 to $2,500 for a straightforward install, or $2,500 to $4,000 if a long cable run or subpanel upgrade is required. Millcreek’s older housing stock frequently means the main panel needs a load-calculation review before a charger circuit is added; actual cost depends on panel capacity and run distance.
What does a panel upgrade cost in Millcreek, UT?+
A standard 200A residential panel upgrade in Millcreek runs $2,800 to $4,500; if the utility requires a new service entrance, which is common on 1970s and 1980s homes, the range rises to $5,500 to $8,000. With 68.3% of Millcreek’s housing built before 1980, service-entrance work is a frequent add-on to panel jobs in this market.
Do I need a permit for electrical work in Millcreek?+
Yes. Permits for electrical work in Millcreek are issued by Millcreek City Building Services (millcreek.us). Standard permit applications are typically processed within 24 to 72 hours, with inspections schedulable 2 to 5 business days after issuance. Caddis pulls all required permits before work begins.
Who services aluminum-wiring homes in Millcreek, UT?+
Caddis Electric services aluminum-wiring homes in Millcreek. Approximately 2,679 homes in Millcreek were built during the 1970s aluminum-wiring era according to Census ACS 2023 Table B25034. Remediation options include CO/ALR device replacement ($75 to $150 per outlet or device) and copper pigtail terminations using COPALUM or AlumiConn connectors; full-home rewire ranges from $8,000 to $18,000 depending on scope.
Can Caddis Electric install a generator in Millcreek, UT?+
Yes. Caddis installs standby and backup generators, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator (18 to 26 kW) with ATS typically runs $8,000 to $15,000 in the Salt Lake County market; a portable generator transfer-switch install runs $800 to $2,000. Permit is required through Millcreek City Building Services.
How long does an electrical permit take in Millcreek City?+
Standard electrical permit applications submitted to Millcreek City Building Services are typically processed within 24 to 72 hours. Inspection scheduling after permit issuance runs 2 to 5 business days. Complex commercial or new-construction permits may take longer; contact Millcreek City Building Services at millcreek.us for scope-specific timelines.
Does Caddis handle remodel electrical in Millcreek, UT?+
Yes. Remodel electrical is part of Caddis’s active scope in Millcreek, covering GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and dedicated circuit work. Millcreek’s large pre-1980 housing base means most remodel jobs also require a panel evaluation before new circuits are added.
What percentage of Millcreek homes have older electrical systems?+
According to Census ACS 2023 Table B25034, 68.3% of Millcreek’s 25,758 housing units were built before 1980, including 9.2% (approximately 2,370 homes) built before 1939 and 10.4% (approximately 2,679 homes) built during the 1970s aluminum-wiring era. These two cohorts are the primary drivers of panel upgrade, rewiring, and remediation demand in the 84106 and 84124 ZIP codes.
How far is Caddis Electric from Millcreek, UT?+
Caddis Electric is based in Springville, UT, approximately 50 miles south of Millcreek via I-15 north and I-80 or I-215 east into Salt Lake County. Millcreek falls within Caddis’s active Salt Lake County service area.
What is the knob-and-tube wiring risk in Millcreek?+
Approximately 2,370 Millcreek homes were built before 1939 according to Census ACS 2023 Table B25034, placing them in the knob-and-tube wiring era. Knob-and-tube systems lack a ground conductor, use insulation that degrades over decades, and are not rated for modern electrical loads. NEC 2023 permits GFCI protection as an alternative to full rewire at ungrounded locations, but a licensed electrician should assess condition before any load is added.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Millcreek, ZCTA 84106, 84124)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Millcreek City Building Services — permits and inspections for electrical work in Millcreek, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
