Monthly Service Report · Updated November 2, 2026
Electrician in Murray
Licensed, permit-pulled electrical work for homes and businesses in and around Murray.
What the team did in Murray
electrical jobs completed in Murray — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Murray, UT (ZIP 84121). The team has completed 2 jobs in Murray since August 2025, spanning panel upgrades, remodel electrical, troubleshooting and service calls, EV charger installation, and aluminum branch-circuit remediation. All work is permit-pulled through Murray City Building Services with required inspection before wall cover or energizing.
Through the report period ending October 19, 2026, Caddis recorded 0 jobs in Murray during September 2026 and 0 jobs during September 2025. The 2 total jobs on record since August 2025 are distributed across ZIP code 84121. September 2026 produced no field activity in this area, consistent with the September 2025 baseline of zero jobs.
Across these 2 Murray jobs, Caddis has handled multiple electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); remodel electrical (GFCI/AFCI code-compliance retrofits, circuit additions); troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); and aluminum branch-circuit remediation (CO/ALR device replacement, copper pigtail terminations with COPALUM or AlumiConn connectors). The pre-1939 segment through the dominant 1970s construction era documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Murray work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Murray
Murray is an incorporated city in Salt Lake County, situated between Salt Lake City to the north and Sandy and Midvale to the south. The city sits in the Salt Lake Valley along the Wasatch Front, with the Wasatch Mountains visible to the east and the Oquirrh Mountains to the west. Murray is served by the Granite School District and contains the Murray City limits along State Street (US-89) and Interstate 15, two of the primary north-south corridors through the valley. The area is proximate to the Fashion Place Mall commercial corridor and the Murray Central TRAX light rail station, both of which anchor the city’s commercial identity within greater Salt Lake County. Caddis Electric dispatches from Springville, UT, reaching Murray via I-15 north through Utah County into Salt Lake County, exiting at the Murray area interchanges near 4500 South or 5300 South.
About Murray’s housing stock
Murray’s housing stock carries a pronounced mid-century and late-20th-century character. According to Census ACS 2023 Table B25034, 58.4% of Murray’s 16,669 housing units were built before 1980, and 31.4% (approximately 5,234 homes) were built during the 1970s. The 1970s construction era coincides directly with the widespread residential use of aluminum branch-circuit wiring, which was common in Utah and nationally when copper prices spiked. Aluminum wiring in that vintage is associated with elevated fire risk at device terminations unless CO/ALR-rated receptacles and switches are installed or copper pigtails are applied using COPALUM or AlumiConn connectors per current NEC guidance.
Only 0.8% of Murray’s housing units (approximately 133 homes) predate 1939, placing the knob-and-tube era at a relatively small share of the stock. However, those structures are the most likely to retain original ungrounded wiring systems and two-prong receptacles, making GFCI retrofit and whole-home rewiring the relevant services for that segment. At the other end of the spectrum, 7.1% of units were built in 2010 or later, representing new-construction and near-new homes where panel capacity, EV charger readiness, and dedicated circuit planning are the dominant electrical concerns.
The combined picture in Murray is a market where the plurality of homes fall into the aluminum-wiring risk window, a smaller but meaningful share require full rewire or GFCI remediation, and a growing new-construction and post-2010 segment is driving demand for EV charger infrastructure and load-side capacity additions. All permit work in Murray is processed through Murray City Building Services.
Electrical services for Murray residents
Serving Murray residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Murray, answered
Is there a licensed electrician serving Murray, UT?+
Caddis Electric is a licensed Utah residential and commercial electrician with completed jobs in Murray, UT (84121) since August 2025. The company is based in Springville, UT and holds a Utah electrical contractor license covering Salt Lake County, where Murray is located.
How much does EV charger installation cost in Murray, UT?+
EV charger installation (Level 2, 240V) in Murray typically runs $800 to $2,500 for a straightforward install, or $2,500 to $4,000 if a long cable run or subpanel upgrade is required. Final cost depends on panel capacity, conduit routing distance, and whether a load-calculation review reveals headroom issues. Caddis pulls permits through Murray City Building Services for all EV charger installs.
What does a panel upgrade cost in Murray, UT?+
A standard 200A residential panel upgrade in Murray runs $2,800 to $4,500. If the utility requires a new service entrance, which is common on 1970s and 1980s homes, costs can reach $5,500 to $8,000. Murray has a large share of pre-1980 housing (58.4% of units per Census ACS 2023 Table B25034), so service entrance replacement is a realistic scope item in this market.
Do I need a permit for electrical work in Murray, UT?+
Yes. Electrical permits in Murray are issued by Murray City Building Services. Most standard scopes, including panel upgrades, EV charger installs, and circuit additions, receive permit issuance within 24 to 72 hours of application, with inspection scheduling typically 2 to 5 business days after issuance. Caddis pulls all required permits before energizing or covering walls.
Who services aluminum-wiring homes in Murray, UT?+
Caddis Electric performs aluminum branch-circuit remediation in Murray, UT. The 1970s construction era accounts for 31.4% of Murray’s housing units (approximately 5,234 homes per Census ACS 2023 Table B25034), and many retain original aluminum branch wiring. Remediation options include CO/ALR-rated device replacement at $75 to $150 per outlet or switch, or full copper pigtail terminations using COPALUM or AlumiConn connectors. Full-home rewire ranges from $8,000 to $18,000 depending on home size and existing conditions.
Can Caddis Electric install a generator in Murray, UT?+
Yes. Caddis installs standby and backup generators in Murray, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. Whole-home standby generator installation (18 to 26 kW) runs $8,000 to $15,000 including the ATS. A portable generator transfer-switch install runs $800 to $2,000. All generator work is permit-pulled through Murray City Building Services.
How long does an electrical permit take in Murray, UT?+
Murray City Building Services typically issues electrical permits within 24 to 72 hours of application for standard residential scopes. Inspection scheduling after permit issuance generally takes 2 to 5 business days. Complex commercial or multi-trade scopes may require additional review time.
Does Caddis handle remodel electrical in Murray, UT?+
Yes. Caddis handles remodel electrical in Murray, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring. Permit work is coordinated through Murray City Building Services, and all work is inspected before wall cover or final energizing.
What share of Murray homes have aluminum wiring?+
Approximately 31.4% of Murray’s housing units (roughly 5,234 homes) were built during the 1970s per Census ACS 2023 Table B25034. That decade is the primary aluminum branch-circuit era in Utah residential construction. Homes from that period should be evaluated by a licensed electrician before adding circuits or replacing devices, as aluminum wiring requires CO/ALR-rated devices or copper pigtail terminations at every connection point.
Does Caddis Electric serve Murray from its Springville base?+
Yes. Caddis Electric dispatches from Springville, UT, reaching Murray via I-15 north through Utah County into Salt Lake County. Murray falls within Caddis’s Salt Lake County service area, and the company has completed jobs in Murray (ZIP 84121) since August 2025.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Murray, ZCTA 84121)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Murray City Building Services — permits and inspections for electrical work in Murray, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
