← All Service Areas

Monthly Service Report · Updated November 2, 2026

Electrician in Riverton

Licensed, permit-pulled electrical work for homes and businesses in and around Riverton.

License #12846504-5501National Electrical Code 2023 (NEC)4.8★ · 19 reviews
2
Jobs completed
4.8★
19 Google reviews
NEC 2023
Code adherence
Licensed
#12846504-5501
This Month's Report

What the team did in Riverton

2

electrical jobs completed in Riverton — all permit-pulled and inspected

Caddis Electric is a licensed Utah residential and commercial electrician actively serving Riverton, UT (ZIP 84096). The team has completed 2 jobs in Riverton since August 2025, spanning panel work, service diagnostics, EV charger installs, remodel electrical, and dedicated-circuit builds. All work is permit-pulled through the Riverton City Building Division with required inspection before wall cover or energizing.

Through the September 2026 report period, Caddis recorded 0 new jobs in Riverton during September 2026 and 0 during September 2025. The 2-job total since August 2025 reflects early-stage coverage in ZIP 84096; both jobs on record involve the newer residential buildout that dominates the Riverton housing market. Activity in adjacent Salt Lake County corridors continues to drive dispatch routing through this area on a regular cycle.

Across these 2 Riverton jobs, Caddis has handled electrical scopes including: EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions); dedicated circuits (isolated grounding, surge suppression, clean-power circuits); and troubleshooting/service calls (circuit tracing, breaker diagnostics, intermittent fault isolation). The minimal pre-1980 segment through the dominant 2010-or-later new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.

This report reflects Caddis’s completed Riverton work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Residential standby backup generator installation similar to Caddis Electric's work in Riverton, UT
Standby generator installation — representative Caddis Electric work
Service Area

Getting to Riverton

Dispatched from Springville, UT

Riverton is a city in Salt Lake County, UT, situated in the southwest portion of the Salt Lake Valley. It borders Herriman to the south, South Jordan to the north, Bluffdale to the southwest, and Draper to the east. Riverton falls within the Jordan School District. The Oquirrh Mountains define the western horizon, and the city sits adjacent to the rapidly developing Daybreak and South Mountain communities that have characterized southwest Salt Lake County’s growth over the past two decades. Riverton’s position within the broader Wasatch Front urban corridor places it close to the Mountain View Corridor (SR-85) and Bangerter Highway (SR-154), both of which serve as primary north-south routes through the western Salt Lake Valley. Caddis Electric dispatches from Springville, UT, reaching Riverton via I-15 north through Salt Lake County, then west on SR-71 (12300 South) or SR-154 (Bangerter Highway) into the 84096 ZIP code.

Caddis Electric service area map
Dot size reflects Caddis’s all-time job count per city. Caddis also serves Afton, WY and Star Valley Ranch, WY in Lincoln County, Wyoming (outside the map frame).
Local Context

About Riverton’s housing stock

Riverton’s housing stock is among the newest on the Wasatch Front. According to Census ACS 2023 Table B25034, 54.4% of Riverton’s 21,168 housing units were built in 2010 or later, a proportion that reflects two decades of sustained residential subdivision development in southwest Salt Lake County. That new-construction concentration drives demand for EV charger installs, panel capacity reviews tied to solar and battery storage, and dedicated-circuit work for home offices and high-draw appliances, all common scopes in newer builds where infrastructure was roughed in before current load profiles were established.

The aluminum-wiring-era segment in Riverton is narrow: Census ACS 2023 Table B25034 places the 1970-1979 cohort at approximately 1.1% of total units, or roughly 233 homes. These properties carry the standard aluminum branch-circuit risk profile, where original outlets and switches may not be rated for direct aluminum termination, making CO/ALR device replacement or COPALUM/AlumiConn copper pigtail remediation the code-appropriate correction. The pre-1939 knob-and-tube cohort is even smaller, estimated at approximately 85 homes (0.4% of total units per Table B25034). Both legacy segments are uncommon in Riverton but not absent, and Caddis carries the diagnostic and remediation capability to address them.

The 3.8% pre-1980 share overall means the vast majority of Riverton electrical service calls involve homes built under modern NEC cycles rather than legacy wiring systems. For those properties, the common triggers are load growth, EV adoption, whole-home generator integration, and AFCI/GFCI retrofit requirements when remodeling permits are opened. All permit-required scopes in Riverton are processed through the Riverton City Building Division.

Who You're Working With

Serving Riverton residents

Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.

Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com

BBB Accredited Caddis Electric LLC

Common Questions

Electrical work in Riverton, answered

Is there a licensed electrician serving Riverton, UT?+

Caddis Electric is a licensed Utah residential and commercial electrician with completed jobs in Riverton, UT (84096) since August 2025. The company is based in Springville, UT, and holds active licensure for both residential and commercial electrical work throughout Salt Lake County.

How much does EV charger installation cost in Riverton, UT?+

A Level 2 (240V) EV charger installation in Riverton typically runs $800 to $2,500 for a straightforward install where the panel has available capacity and the run is short. Longer cable runs or installs requiring a subpanel upgrade can push the cost to $2,500 to $4,000. Actual pricing depends on panel location, conduit routing, and whether a load calculation identifies available capacity; a site assessment before quoting is standard practice.

What does a panel upgrade cost in Riverton, UT?+

A standard 100A-to-200A residential panel upgrade in Riverton runs $2,800 to $4,500. If the utility requires a new service entrance, which is common on 1970s and 1980s-era homes, the range increases to $5,500 to $8,000. Riverton’s housing stock skews heavily toward post-2010 builds, where panels are typically already 200A, so the more common panel scope involves subpanel additions or main breaker replacement rather than full service upgrades.

Do I need a permit for electrical work in Riverton, UT?+

Yes. Permit-required electrical work in Riverton is processed through the Riverton City Building Division (rivertoncity.com). Standard permit issuance runs 24 to 72 hours after application, and inspection scheduling after issuance typically takes 2 to 5 business days. Caddis pulls all required permits before beginning work, and no walls are covered or circuits energized until inspection sign-off is complete.

Who services aluminum-wiring homes in Riverton, UT?+

Caddis Electric handles aluminum branch-circuit remediation in Riverton, UT. The city has approximately 233 homes built during the 1970-1979 aluminum-wiring era (Census ACS 2023 Table B25034). Remediation options include CO/ALR device replacement at $75 to $150 per outlet or device, or full-home rewire in the $8,000 to $18,000 range using COPALUM or AlumiConn copper pigtail terminations per NEC requirements.

Can Caddis Electric install a generator in Riverton, UT?+

Yes. Caddis installs standby and backup generators in Riverton, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator (18 to 26 kW) with ATS typically runs $8,000 to $15,000 installed. A portable generator transfer-switch install is generally $800 to $2,000. Specific pricing depends on generator size, ATS type, and panel configuration.

How long does an electrical permit take in Riverton City?+

The Riverton City Building Division typically issues standard electrical permits within 24 to 72 hours of application. Inspection scheduling after permit issuance runs 2 to 5 business days in most cases. Complex commercial or new-construction scopes may require plan review, which extends the timeline; Caddis coordinates permit timing with project scheduling to minimize delays.

Does Caddis handle remodel electrical in Riverton, UT?+

Yes. Remodel electrical is part of Caddis’s active scope in Riverton, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and dedicated-circuit builds for remodeled spaces. When a remodel permit is opened in Riverton, current NEC 2023 code adoption in Utah requires AFCI and GFCI protection in applicable spaces, which often drives retrofit work even in newer homes.

What percentage of Riverton homes are new construction?+

According to Census ACS 2023 Table B25034, 54.4% of Riverton’s 21,168 housing units were built in 2010 or later, making new-construction-era homes the dominant housing cohort in the city. This proportion is notably high compared to other Wasatch Front cities and reflects the sustained residential development in southwest Salt Lake County over the past 15 years.

Does Riverton have knob-and-tube wiring risk?+

Riverton has a very limited knob-and-tube era housing stock. Census ACS 2023 Table B25034 estimates approximately 85 homes (0.4% of total units) were built before 1939, the primary knob-and-tube era. Caddis can diagnose and remediate knob-and-tube systems in Riverton, but the scope is uncommon given the city’s predominantly modern housing stock.

What dedicated-circuit work does Caddis do in Riverton, UT?+

Caddis installs dedicated circuits in Riverton for home offices, server rooms, EV chargers, and high-draw appliances, including isolated grounding, surge suppression, and clean-power circuits where required. In Riverton’s newer housing stock, dedicated-circuit additions are a common request tied to home office buildouts, EV adoption, and large kitchen appliance installations.

4.8★★★★★

across 19 Google reviews

Sources

  • U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Riverton, ZCTA 84096)
  • National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
  • Riverton City Building Division — permits and inspections for electrical work in Riverton, UT

Monthly report by Caddis Electric · last updated November 2, 2026.

Need an electrician for your Utah home?

Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.

(801) 348-9201
Schedule Estimate