Monthly Service Report · Updated November 2, 2026
Electrician in Sandy
Licensed, permit-pulled electrical work for homes and businesses in and around Sandy.
What the team did in Sandy
electrical jobs completed in Sandy — all permit-pulled and inspected
Scopes handled
Caddis Electric is a licensed Utah residential and commercial electrician actively serving Sandy, UT (ZIP 84070, 84092, 84093). The team has completed 9 jobs in Sandy since August 2025, spanning panel upgrades, EV charger installation, aluminum branch-circuit remediation, remodel electrical, dedicated circuits, and troubleshooting and service calls. All work is permit-pulled through Sandy City Building and Safety with required inspection before wall cover or energizing.
Sandy recorded 0 Caddis jobs in September 2026 and 0 jobs in September 2025. The 9 total jobs in Sandy represent cumulative field activity logged in Caddis’s JobTread system since August 2025, distributed across the 84070, 84092, and 84093 zip codes that together cover Sandy’s residential and commercial corridors.
Across these 9 Sandy jobs, Caddis has handled multiple distinct electrical scopes: panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors); remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions); dedicated circuits (isolated grounding, surge suppression, clean-power circuits); and troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation). The pre-1939 segment through the active new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.
This report reflects Caddis’s completed Sandy work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Getting to Sandy
Sandy is a city in Salt Lake County, situated along the central Wasatch Front between Draper to the south and South Jordan and Midvale to the north and northwest. The city borders the Wasatch Mountains to the east, with the Cottonwood Canyons corridor (Big Cottonwood Canyon and Little Cottonwood Canyon) providing prominent eastern landmarks used by residents for orientation. Sandy is served by the Canyons School District and is adjacent to the cities of Draper, South Jordan, Midvale, and Murray. The area sits within the broader Salt Lake Valley and is accessible from multiple TRAX light-rail stations along the Salt Lake County grid. Caddis Electric dispatches from Springville, UT, reaching Sandy via I-15 north through Provo and Salt Lake County, exiting onto local Sandy City arterials such as 700 East or 10600 South depending on the specific job site zip code.
About Sandy’s housing stock
Sandy’s housing stock of 30,159 total units carries a substantial legacy electrical risk profile. Census ACS 2023 Table B25034 shows that 44.3 percent of Sandy homes were built before 1980, and 33.5 percent, roughly 10,103 homes, were built during the 1970s. The 1970s construction era coincides directly with the period when aluminum branch-circuit wiring was widely used in residential builds nationwide. Aluminum wiring expands and contracts at a different rate than copper, leading to loose terminations at outlets, switches, and panel lugs over decades of thermal cycling. Sandy’s concentration of 1970s housing makes aluminum-wiring remediation a recurring and technically specific scope for any electrician working the area.
At the other end of the age spectrum, Census ACS 2023 Table B25034 documents that 1.2 percent of Sandy’s housing units, approximately 362 homes, predate 1939. Structures of that age may retain knob-and-tube wiring or early cloth-insulated circuits. While knob-and-tube is not automatically a code violation in Utah if undisturbed, it cannot legally be covered with insulation and typically triggers full-circuit replacement during any remodel that opens walls. Inspectors and insurers in Salt Lake County increasingly flag these systems during home-sale transactions.
New construction accounts for 12.8 percent of Sandy’s housing stock, representing units built in 2010 or later. These homes typically require 200-amp service entrances, EV charger rough-ins, AFCI protection on all bedroom and living-area circuits per NEC 2023, and coordinated utility meter-base inspections through Rocky Mountain Power. The simultaneous presence of 1970s aluminum-wired stock and active new-development phases means electricians operating in Sandy must carry competency across both remediation scopes and new-construction wiring protocols, a breadth reflected in the service categories Caddis has completed across Sandy’s three zip codes.
Housing age profile
Eras that drive remediation work
Bars show each era’s share of the total stock (not additive). The 1980–2009 band is derived as 100 − the two shares Census reports.
Electrical services for Sandy residents
Serving Sandy residents
Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.
Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com
Electrical work in Sandy, answered
Is there a licensed electrician serving Sandy, UT?+
Yes. Caddis Electric is a licensed Utah residential and commercial electrician with completed jobs in Sandy across zip codes 84070, 84092, and 84093. The team pulls permits through Sandy City Building and Safety and schedules inspections before any wall cover or energizing.
How much does EV charger installation cost in Sandy, UT?+
A straightforward Level 2, 240V EV charger install in Sandy typically runs $800 to $2,500. If the job requires a long cable run or a subpanel upgrade, the range rises to $2,500 to $4,000. Actual cost depends on panel capacity, run length, and whether a load-calculation review identifies the need for service upgrades; a site assessment before quoting is standard practice.
What does a panel upgrade cost in Sandy, UT?+
A standard 100A-to-200A residential panel upgrade in Sandy runs $2,800 to $4,500. On 1970s and 1980s homes, where Sandy’s housing stock is heavily concentrated per Census ACS 2023 Table B25034, Rocky Mountain Power sometimes requires a new service entrance, which can push total cost to $5,500 to $8,000. All panel upgrades require a permit through Sandy City Building and Safety.
Do I need a permit for electrical work in Sandy, UT?+
Yes. Sandy City Building and Safety requires permits for panel upgrades, new circuits, EV charger installs, generator connections, and most wiring work. Permit issuance for standard scopes typically takes 24 to 72 hours after application, and inspection scheduling after issuance is generally 2 to 5 business days. Caddis pulls all required permits as part of its standard project process.
Who services aluminum-wiring homes in Sandy, UT?+
Caddis Electric performs aluminum branch-circuit remediation in Sandy, including CO/ALR device replacement in 1970s builds and copper pigtail terminations using COPALUM or AlumiConn connectors. With approximately 10,103 Sandy homes built during the 1970s per Census ACS 2023 Table B25034, aluminum-wiring remediation is one of the more technically specific recurring scopes in this market. Per-device remediation typically costs $75 to $150 per outlet or switch; full-home rewire ranges from $8,000 to $18,000 depending on home size and scope.
Can Caddis Electric install a generator in Sandy, UT?+
Yes. Caddis installs standby and backup generators in Sandy, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator install in the 18 to 26 kW range typically costs $8,000 to $15,000 including the ATS. A portable generator transfer-switch install runs $800 to $2,000. Permits are pulled through Sandy City Building and Safety for all generator work.
How long does an electrical permit take in Sandy City?+
Standard electrical permit scopes submitted to Sandy City Building and Safety are typically issued within 24 to 72 hours of application. Inspection scheduling after permit issuance is generally 2 to 5 business days. Complex commercial scopes or plan-review projects may take longer; Sandy City’s building department contact and application portal are accessible at sandy.utah.gov.
Does Caddis handle remodel electrical in Sandy, UT?+
Yes. Caddis performs remodel electrical in Sandy, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and work scoped to NEC 2023 requirements. Utah adopted the NEC 2023 edition statewide, which requires AFCI protection on all bedroom and living-area circuits, a common upgrade trigger during kitchen and bath remodels in Sandy’s older housing stock.
What zip codes does Caddis Electric serve in Sandy, UT?+
Caddis Electric has completed jobs in all three Sandy zip codes: 84070, 84092, and 84093. These zip codes together cover Sandy’s residential and commercial corridors across the city’s west-to-east span from the Salt Lake Valley floor toward the Wasatch Mountain foothills.
How many homes in Sandy, UT have aluminum wiring?+
Census ACS 2023 Table B25034 documents that approximately 33.5 percent of Sandy’s 30,159 housing units, roughly 10,103 homes, were built during the 1970s, the primary era of aluminum branch-circuit wiring in residential construction. Not all 1970s homes necessarily have aluminum branch circuits, as some were built with copper, but the 1970s cohort is the standard screening threshold electricians and inspectors use when evaluating remediation risk in Sandy.
Does Caddis Electric serve Sandy from Springville? How far is it?+
Yes. Caddis Electric is based in Springville, UT, in Utah County, and dispatches to Sandy via I-15 north into Salt Lake County. Sandy is a routine service area for Caddis and is included within its documented Salt Lake County service footprint. The team has logged completed jobs across Sandy’s 84070, 84092, and 84093 zip codes since August 2025.
across 19 Google reviews
Related neighborhoods
Sources
- U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Sandy, ZCTA 84070, 84092, 84093)
- National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
- Sandy City Building and Safety — permits and inspections for electrical work in Sandy, UT
Monthly report by Caddis Electric · last updated November 2, 2026.
Need an electrician for your Utah home?
Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.
