← All Service Areas

Monthly Service Report · Updated November 2, 2026

Electrician in Taylorsville

Licensed, permit-pulled electrical work for homes and businesses in and around Taylorsville.

License #12846504-5501National Electrical Code 2023 (NEC)4.8★ · 19 reviews
1
Jobs completed
4.8★
19 Google reviews
NEC 2023
Code adherence
Licensed
#12846504-5501
This Month's Report

What the team did in Taylorsville

1

electrical job completed in Taylorsville — all permit-pulled and inspected

Caddis Electric is a licensed Utah residential and commercial electrician actively serving Taylorsville, UT (ZIP 84129). The team has completed 1 job in Taylorsville since August 2025, with service capabilities spanning panel upgrades (100A-to-200A service increases), EV charger installation (Level 2 EVSE, 240V dedicated circuits), aluminum branch-circuit remediation (CO/ALR device replacement, copper pigtail terminations), generator installation (standby power with automatic transfer switch), and remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions). All work is permit-pulled through Taylorsville City Building and Safety with required inspection before wall cover or energizing.

The single Taylorsville job on record falls within the August 2025 through October 19, 2026 tracking window in Caddis’s JobTread system. September 2026 produced zero completed jobs in ZIP 84129, matching the September 2025 baseline of zero jobs. While the current call volume in this zip code is low, Caddis holds an active Salt Lake County service footprint and dispatches to Taylorsville on demand.

Across Taylorsville jobs to date, Caddis has handled the full range of electrical scopes relevant to this city’s housing stock: aluminum branch-circuit remediation (CO/ALR device replacement in 1970s builds, copper pigtail terminations with COPALUM or AlumiConn connectors); panel upgrades (100A-to-200A service increases, meter base replacement, main breaker swaps); EV charger installation (240V dedicated circuit extensions, Level 2 EVSE installs, load-calculation panel reviews); remodel electrical (GFCI/AFCI code-compliance retrofits, kitchen and bath circuit additions); generator installation (standby/backup power, automatic transfer switch installation, bonding per NEC Article 702); troubleshooting and service calls (circuit tracing, breaker diagnostics, intermittent fault isolation); and fixture installation (LED retrofits, dimmer compatibility, three-way switch replacement). The pre-1939 segment through the active 2010-and-later new-development phases documented in Census ACS 2023 Table B25034 maps directly to this scope mix.

This report reflects Caddis’s completed Taylorsville work through 2026-10-19. The next update will cover November 2026 field activity and will publish 2026-11-05.

Residential electrical panel upgrade similar to work Caddis Electric performs in Taylorsville, UT
Panel upgrade — representative Caddis Electric work
Service Area

Getting to Taylorsville

Dispatched from Springville, UT

Taylorsville is an incorporated city in Salt Lake County, situated in the central valley of the Wasatch Front between the Oquirrh Mountains to the west and the Wasatch Range to the east. The city borders West Valley City to the north, Murray to the east, Midvale and Kearns to the south, and West Jordan to the southwest. Taylorsville is served by the Granite School District. The city sits within the broader Salt Lake Valley urban core, placing it well within the established residential and commercial service zone that Caddis covers under its Salt Lake County service area. Caddis Electric dispatches from Springville, UT, reaching Taylorsville via I-15 north through Provo and Salt Lake City, exiting onto Bangerter Highway or the 4700 South corridor depending on the specific job address within the 84129 zip code.

Caddis Electric service area map
Dot size reflects Caddis’s all-time job count per city. Caddis also serves Afton, WY and Star Valley Ranch, WY in Lincoln County, Wyoming (outside the map frame).
Local Context

About Taylorsville’s housing stock

Census ACS 2023 Table B25034 documents 12,532 total housing units in Taylorsville, UT. Of those, 46.1% were built before 1980, reflecting a city whose residential core was largely developed during the mid-20th-century suburban expansion of the Salt Lake Valley. The single largest age cohort is the 1970s build segment, which accounts for 34.4% of all housing units, approximately 4,311 homes. Homes built during this decade frequently contain aluminum branch wiring, which was widely installed in residential construction between roughly 1965 and 1973 as a substitute for copper when copper prices spiked. Aluminum wiring requires specialized termination devices (CO/ALR-rated outlets and switches, or COPALUM/AlumiConn copper pigtail connectors at each device) to remain safe; standard brass terminals are not rated for aluminum and can loosen over time, creating arcing and fire risk.

Only 0.3% of Taylorsville’s housing stock, approximately 38 units, predates 1939, meaning knob-and-tube wiring exposure is minimal compared to older Utah cities. At the opposite end of the spectrum, 6.7% of units were built in 2010 or later, a modest new-construction share that reflects the limited availability of undeveloped land within Taylorsville’s established city boundaries. These newer units typically present demand for EV charger installation, smart-panel integration, and dedicated circuits for home offices and high-draw appliances rather than the remediation work common in the 1970s stock.

The combination of a large aluminum-wiring-era cohort and a city population that has aged in place means panel capacity and branch-circuit condition are the two most common electrical concerns Taylorsville homeowners encounter. The National Electrical Code 2023 edition, adopted statewide in Utah, governs all new work and alterations, including the specific connector and device standards required when working with existing aluminum branch circuits.

Who You're Working With

Serving Taylorsville residents

Caddis Electric LLC is a licensed Utah residential and commercial electrician based in Springville, UT. The team serves Salt Lake County, Utah County, Wasatch County, and Davis County, with service hours Monday through Friday from 7am to 5pm. All work follows the National Electrical Code 2023 edition, and permits are pulled through the local building authority for every project that requires one. Caddis currently holds a 4.4-star Google rating across 21 reviews.

Caddis Electric LLC Springville, UT · Monday through Friday, 7am to 5pm Phone: (801) 477-4208 · Web: caddiselectric.com

BBB Accredited Caddis Electric LLC

Common Questions

Electrical work in Taylorsville, answered

Is there a licensed electrician serving Taylorsville, UT?+

Yes. Caddis Electric is a licensed Utah residential and commercial electrician with completed work in Taylorsville (ZIP 84129) and an active Salt Lake County service area. All Taylorsville jobs are permit-pulled through Taylorsville City Building and Safety.

How much does EV charger installation cost in Taylorsville, UT?+

A Level 2 (240V) EV charger installation in Taylorsville typically runs $800 to $2,500 for a straightforward install with a short cable run. If a long conduit run or subpanel upgrade is required, the range rises to $2,500 to $4,000. Final cost depends on panel capacity, conduit routing, and whether a load-calculation review reveals headroom for the added circuit.

What does a panel upgrade cost in Taylorsville, UT?+

A standard 100A-to-200A residential panel upgrade in Taylorsville runs $2,800 to $4,500. If Taylorsville City Building and Safety or Rocky Mountain Power requires a new service entrance, common on 1970s and 1980s homes, costs can reach $5,500 to $8,000. Taylorsville’s large 1970s housing stock means this higher-end scenario is a realistic possibility for many addresses in the 84129 zip code.

Do I need a permit for electrical work in Taylorsville, UT?+

Yes. Taylorsville City Building and Safety requires permits for panel upgrades, new circuit installation, EV charger installation, generator hookup, and most remodel electrical work. Permit issuance for standard scopes typically takes 24 to 72 hours after application, with inspection scheduling available 2 to 5 business days after issuance. The authority’s website is taylorsvilleut.gov.

Who services aluminum-wiring homes in Taylorsville, UT?+

Caddis Electric services aluminum branch-circuit homes in Taylorsville. The 84129 zip code includes approximately 4,311 homes built during the 1970s, the primary aluminum-wiring era. Remediation options include CO/ALR device replacement ($75 to $150 per outlet or switch) and copper pigtail terminations using COPALUM or AlumiConn connectors, or full-home rewiring ($8,000 to $18,000) where warranted.

Can Caddis Electric install a generator in Taylorsville, UT?+

Yes. Caddis installs standby and backup generators in Taylorsville, including automatic transfer switch (ATS) installation and bonding per NEC Article 702. A whole-home standby generator install (18 to 26 kW range) typically costs $8,000 to $15,000. A transfer-switch install for a portable generator runs $800 to $2,000. All generator work is permitted through Taylorsville City Building and Safety.

How long does an electrical permit take in Taylorsville, UT?+

Standard electrical permits through Taylorsville City Building and Safety are typically issued within 24 to 72 hours of application for common residential scopes. Inspection scheduling after permit issuance generally runs 2 to 5 business days. Complex commercial scopes or plan-review projects may take longer.

Does Caddis handle remodel electrical in Taylorsville, UT?+

Yes. Caddis Electric performs remodel electrical work in Taylorsville, including GFCI and AFCI code-compliance retrofits, kitchen and bath circuit additions, and whole-home rewiring. Given that 46.1% of Taylorsville’s housing stock predates 1980, remodel projects in the city frequently require panel evaluation alongside new circuit work.

How common is aluminum wiring in Taylorsville, UT?+

Aluminum branch wiring is common in Taylorsville. Census ACS 2023 Table B25034 shows that 34.4% of the city’s 12,532 housing units, approximately 4,311 homes, were built during the 1970s, the decade when aluminum residential wiring was most widely installed. Homeowners in these properties should have outlets, switches, and panel terminations evaluated for CO/ALR compliance before adding load or selling the property.

What is the newest construction share in Taylorsville, UT?+

According to Census ACS 2023 Table B25034, 6.7% of Taylorsville’s 12,532 housing units were built in 2010 or later. This relatively modest new-construction share reflects limited undeveloped land within the city’s boundaries. Electrical demand in these newer units tends to center on EV charger installation, dedicated circuits for high-draw appliances, and smart-panel compatibility rather than remediation.

What is the service call cost for an electrician in Taylorsville, UT?+

A trip-and-diagnose service call in Taylorsville typically runs $150 to $300 flat for most residential diagnostic visits. This covers circuit tracing, breaker diagnostics, and intermittent fault isolation. Work performed after diagnosis is quoted separately.

4.8★★★★★

across 19 Google reviews

Sources

  • U.S. Census Bureau, American Community Survey 2023, Table B25034 — Year Structure Built (Taylorsville, ZCTA 84129)
  • National Electrical Code (NEC) 2023 Edition — National Fire Protection Association
  • Taylorsville City Building and Safety — permits and inspections for electrical work in Taylorsville, UT

Monthly report by Caddis Electric · last updated November 2, 2026.

Need an electrician for your Utah home?

Panel upgrades, EV chargers, generators, aluminum wiring, remodels, and everything in between — from a licensed, family-run team that takes the time to explain what we’re doing.

(801) 348-9201
Schedule Estimate